Dexter 6-Cycle OPL WN Non-Express Large Chassis Parts
Model Family · Source: Dexter parts manual 8533-083-001, 2/26
Controls & electronics (67)
| Part | Description |
|---|---|
| 8711-004-001 | Transformer, Main |
| 9539-461-007 | Switch, Locking Sensing |
| 9539-461-008 | Switch, Latching Sensing |
| 9539-492-001 | Switch, Door Hinge Close (Plunger) |
| 9586-001-001 | Thermoactuator - Door Lock Relay 120v |
| 8220-001-231 | Wire Assy-blk/blu, 6 1/2” |
| 8220-001-232 | Wire Assy Red/blu |
| 8220-001-233 | Wire Assy Blk/blu |
| 8220-062-025 | Wire Assembly, Red 28" |
| 8220-063-028 | Red Wire (Door Close Switch) |
| 8220-063-029 | Black Wire (Door Close Switch) |
| 8220-108-008 | Wire Red Yellow 8” |
| 8220-117-002 | Wire Assy, Jumper |
| 8220-117-003 | Wire Assy, Jumper |
| 8220-118-001 | Wire Assy, Violet 24” |
| 8220-119-002 | Wire-assy, Jumper, Yellow |
| 8220-123-001 | Wire-assy, Jumper, Yellow |
| 8507-449-002 | Instructions, Transformer Connect |
| 8636-018-001 | Fuse 1.5 Amp |
| 8636-018-004 | Fuse 2.5 Amp |
| 8650-027-001 | Lock-run/program, W/harness & Key, P2 |
| 8654-117-015 | Clamp, Pressure Switch Hose |
| 8711-004-003 | Controls Transformer, 200/250-24v |
| 8711-009-001 | Transformer, (Step Down) |
| 8711-009-003 | Transformer |
| 8711-009-004 | Transformer, Control |
| 8711-015-001 | Transformer 120/18vac |
| 9008-005-001 | Actuator, Latching Switch |
| 9008-006-003 | Actuator, Switch Locking |
| 9029-163-001 | Bracket Switch |
| 9035-062-003 | Pushbutton Control (Opl), Black |
| 9053-067-002 | Bushing , Wire 7/8 |
| 9150-044-001 | Delta E Drive Display |
| 9200-001-002 | Fuseholder |
| 9242-175-004 | Hose, Pressure Switch |
| 9242-175-007 | Hose, Pressure Switch |
| 9473-004-010 | Pcb Assembly Control /display |
| 9473-006-001 | Pcb Assembly Relay Main |
| 9473-007-001 | Optional Relay Board |
| 9538-182-001 | Spacer Sensor |
| 9539-490-001 | Switch, Pressure |
| 9550-169-003 | Shield, Switch |
| 9586-001-003 | Thermoactuator - Door Lock Relay 24v |
| 9627-747-002 | Harness Power Terminal Block |
| 9627-747-003 | Harness-power, Terminal Block |
| 9627-747-006 | Harness, Power Terminal Block |
| 9627-791-005 | Wiring Harness, Door Lock |
| 9627-793-001 | Harness P20/p21 |
| 9627-794-001 | Harness P8/p16 |
| 9627-794-004 | Harness P8/p16 , Control |
| 9627-795-002 | Harness P19/water Valve |
| 9627-795-004 | Wiring Harness Watervalve/p19 |
| 9627-796-002 | Harness, P17 Drain/therm/sol |
| 9627-797-001 | Harness Ledpcb |
| 9627-798-001 | Harness, P23 to P15 |
| 9627-799-001 | Harness-injection |
| 9627-799-003 | Harness-injection |
| 9627-807-001 | Harness P5/pressure |
| 9627-914-001 | Wiring Harness Main, 1.5 |
| 9631-381-018 | Wire Assembly, P12, Red 7" |
| 9732-314-001 | Kit-pressure Sensor, Electronic |
| 9732-315-001 | Kit-replacement, Pressure Sensor (Only) |
| 9857-216-001 | Trough Assy,controls 208-240 Volt (All Parts Below |
| 9857-216-003 | Assembly, Control Trough |
| 9857-217-001 | Trough Assy,controls 208-240 Volt (All Parts Below |
| 9857-217-002 | Assembly, Control Trough |
| 9989-480-001 | Panel, Control (Mounts Name- |
Water valves & plumbing (47)
| Part | Description |
|---|---|
| 9118-049-001 | Diaphragm Invensys (Epdm) |
| 9122-005-004 | Dispenser Soap |
| 9206-416-001 | Gasket, Dispenser |
| 9379-183-012 | Valve, Water Inlet (Includes 1 Thru 6) |
| 9379-202-001 | Drain Valve 3” |
| 0935-135-001 | Inlet Cap |
| 8641-242-000 | Washer, Inlet Hose (Furnished) |
| 8654-117-008 | Clamp, Hose Vent |
| 8654-117-014 | Clamp |
| 8654-117-018 | Clamp, Hose Overflow to Drain |
| 8654-117-019 | Clamp for Motor Bushing |
| 8654-125-005 | Clamp, Cable |
| 9029-162-002 | Bracket, Drain Tube |
| 9064-072-001 | Body, Valve (W/ball) |
| 9081-108-001 | Channel-support,dispenser |
| 9108-095-005 | Door, Dispenser |
| 9118-049-002 | Diaphragm Invensys (Viton) |
| 9118-049-003 | Diaphragm Invensys (Epdm Nsf) |
| 9118-054-001 | Diaphragm Mueller |
| 9118-055-001 | Diaphragm Mueller |
| 9206-425-001 | Det. Dispenser Mtg Gasket to Tub Frnt |
| 9242-449-003 | Hose, Overflow to Drain |
| 9242-450-001 | Hose, Despinsor to Tub |
| 9242-456-001 | Hose, Tub to Drain Valve |
| 9242-457-001 | Hose, Drain Valve to Tube |
| 9242-461-001 | Hose, Vacuum Breaker to Tub Injection Tube |
| 9379-183-013 | Water Valve |
| 9379-192-001 | Dual Coil Water Valve Mueller |
| 9379-192-002 | Valve Water Body Complete(no Coil) |
| 9379-194-001 | Single Coil Water Valve Mueller |
| 9379-194-002 | Valve Water Body Complete |
| 9379-194-003 | Water Valve Single |
| 9379-200-001 | Drain Valve |
| 9452-794-001 | Plate-cover, Water Valves |
| 9452-814-001 | Mounting Plate Water Valves |
| 9475-002-002 | Flow Restrictors (In Dispenser ) |
| 9495-064-001 | Screw, Valve M4x0.7x8mm |
| 9550-195-001 | Shield Over Water Valves Plastic |
| 9555-056-001 | Screen, Inlet End of Valve |
| 9565-003-001 | Strainer, Inlet Hose (Furnished) |
| 9785-001-001 | Diaphragm Assembly Mueller Includes |
| 9807-087-001 | Soap Dispenser (No Lid) |
| 9915-120-004 | Drain Tube |
| 9915-126-002 | Drain Tube |
| 9950-055-001 | Ring Assy, Tub Mtg-front Clamp |
| 9987-104-001 | Lid Assembly Dispenser |
| 9990-027-013 | Hose, Water Supply 5/8” I.d. X 48” |
Drive & motor (34)
| Part | Description |
|---|---|
| 9040-079-002 | Drive Belt |
| 9040-079-003 | Drive Belt |
| 8640-418-003 | Nut 3/4”-10 (Bearing Housing to Frame) |
| 8641-588-001 | Washers Spherical 3/4 (Male Half) (Bearing Housing to Frame) |
| 8641-588-002 | Washers Spherical 3/4 (Female Half) (Bearing Housing to Frame) |
| 9036-159-005 | Bearing, Front (Large) |
| 9036-159-006 | Bearing, Front (Small) |
| 9053-074-002 | Bushing, Motor -support |
| 9053-077-001 | Split Taperbushing (Motor Pulley) |
| 9053-082-001 | Motor Bushing (Rubber) |
| 9076-052-002 | Collar-shaft, W/set Screws |
| 9099-012-004 | Chain-belt Tension |
| 9189-013-001 | Vfd Cooling Fan |
| 9189-016-001 | Vfd Cooling Fan |
| 9241-181-004 | Housing, Bearing |
| 9376-308-001 | Drive Motor, 3 Phase |
| 9376-329-001 | Drive Motor, 3 Phase (Inverter Duty) |
| 9452-538-001 | Plate, Motor Mtg |
| 9453-175-002 | Pulley, Motor |
| 9453-176-006 | Pulley, Driven |
| 9487-238-004 | Ring, Bearing Retainer |
| 9497-222-004 | Rod, Motor Mtg |
| 9534-369-001 | Spring, Belt Tension |
| 9537-195-002 | Shaft, Door Locking |
| 9538-149-001 | Plate (Spacers Needed for Replacement Motor Mtg. Plate) |
| 9538-170-001 | Spacer, Bearing |
| 9545-057-002 | Screw-hex Cap, 3/4”-10 X 3” (Bearing Housing to Frame) |
| 9545-059-004 | Bolt, Tub End of Bearing Housing (7/16-14x1), Bolt From Inside Tub |
| 9732-219-007 | Bearings and Seal Kit |
| 9803-187-001 | Housing, Bearing- Assembly (Items #2-#6) |
| 9914-137-014 | Motor & Gear Assembly 24v |
| 9914-137-015 | Motor & Gear Assembly 120v |
| 9914-137-023 | Motor & Gear Train (Complete) |
| 9922-015-001 | Door Lock Gear Motor Assembly |
Door & lock (38)
| Part | Description |
|---|---|
| 8650-012-003 | Lock, Top (W/key) |
| 9206-431-001 | Door Gasket |
| 9244-091-001 | Handle, Door |
| 9732-347-001 | Kit - Door Lock Assy. & Cam |
| 8640-413-002 | Nut, Hinge to Door |
| 8640-417-005 | Nut, Wiz Lock |
| 9001-063-001 | Arm - Door Lock |
| 9029-204-001 | Bracket Slide Lock |
| 9051-055-001 | Bumper Loading Door |
| 9095-049-001 | Cam, Lock-top |
| 9095-051-001 | Cam, Locking |
| 9244-086-003 | Handle (Bumper Guard) |
| 9306-025-001 | Top Lock Key #6324 |
| 9452-625-001 | Plate-latch, Top |
| 9467-025-001 | Post, Door Mounting |
| 9487-275-001 | Door Ring 180 Degree Large Hnge |
| 9497-225-015 | Rod, Door Lock |
| 9534-360-002 | Spring, Lock Cam |
| 9538-189-001 | Lock Spacer |
| 9545-014-013 | Screw, Loading Door Hinge Mtg |
| 9545-018-014 | Screw, Lock Mtg 1/4”-20 X 3/4” |
| 9545-056-002 | Thrd Form Screw, Door Mtg 5/16” X 5/8” |
| 9552-037-001 | Shim, Door Lock, Thin |
| 9552-043-001 | Shim Large Door |
| 9635-020-001 | Door Glass Window |
| 9732-139-001 | Kit - Door Gasket Expander Kit (Small) |
| 9732-139-002 | Kit - Door Gasket Expander Kit (Large) |
| 9732-290-001 | Kit-soap Dish, Replacement (Large Door) |
| 9732-346-001 | Kit - Locking Pawl Replacement |
| 9732-346-002 | Pawl, Locking |
| 9845-006-001 | Top Door Hinge Leaf (No Pin) |
| 9845-007-001 | Bottom Door Hinge Leaf |
| 9885-031-001 | Latching Assy, Complete |
| 9955-031-001 | Door Hinge Assembly (Mounts to Tub Front) |
| 9960-286-004 | Door, Lower Service, Includes Handle |
| 9960-310-001 | Door Assembly Complete |
| 9982-346-001 | Plate Assy, Door Lock |
| 9985-190-001 | Bracket Assy, Slide Lock Actuator |
Coin & payment (1)
| Part | Description |
|---|---|
| 9545-053-002 | Coin Drop Screws |
Seals & gaskets (7)
| Part | Description |
|---|---|
| 8538-151-002 | Sealing Compound Rtv-45 |
| 9206-421-002 | Gasket, Tub Front |
| 9532-134-001 | Seal, V Packer |
| 9532-140-007 | Seal, Small V85a |
| 9532-140-008 | Seal, Large V140a |
| 9732-327-001 | Kit - Seal Replacement |
| 9950-052-001 | Ring, Seal Mounting |
Hardware (104)
| Part | Description |
|---|---|
| 9545-008-014 | Screw, Flat Head- Front to Sides |
| 8460-413-002 | Nut, #10-32unf, 2b |
| 8507-275-001 | Instructions Spin Direction |
| 8639-994-001 | Screw |
| 8640-399-007 | Nut, Spring |
| 8640-399-008 | Nut, Spring |
| 8640-401-001 | Nut, Twin 4-40 |
| 8640-411-002 | Nut Elasticstop #6-32 |
| 8640-411-003 | Nut Hexkeps #6-32 |
| 8640-412-005 | Nuts-hexkeps, #8-32 |
| 8640-413-004 | Nut, Elastic Stop 10-32 |
| 8640-413-006 | Nut Hex Elasticstop #10-32 Ss |
| 8640-414-003 | Nut, 1/4 Elastic Stop |
| 8640-414-006 | Nut, Hex 1/4-20 Unc |
| 8640-415-001 | Nut Wcad 3/8”-16 |
| 8640-424-002 | Nut Hexelasticstop #4-40 |
| 8640-426-001 | Nut, 9/32 - 28 Hex |
| 8640-442-001 | Nut, Spring-to Front Panel |
| 8641-222-000 | Special Washer, Rubber |
| 8641-569-003 | Washer, Spring |
| 8641-581-008 | Washer Flat 5/16 |
| 8641-581-017 | Flat Washer 1/4 X 7/8 |
| 8641-581-018 | Washer, Flat 1/4 |
| 8641-581-026 | Washer -flat |
| 8641-581-030 | Washer, Flat |
| 8641-581-031 | Washer |
| 8641-581-034 | Washer, Flat |
| 8641-581-043 | Washer-flat .675x2-1/2x1/4 |
| 8641-582-003 | Washer, 3/8” |
| 8641-582-005 | Lockwasher #6 Exttooth |
| 8641-582-006 | Lockwasher #10 |
| 8641-582-007 | Lockwasher 1/4” Ext Tooth |
| 8641-582-018 | Lockwasher-exttooth, 5/8 |
| 8641-582-020 | Lockwasher-exttooth, 3/4 |
| 8641-584-001 | Washer |
| 8641-585-001 | Washer, Finish |
| 8641-586-002 | Bevel Washer for 5/8” Bolt Used in Installations Using Angle Iron Bases |
| 8641-586-003 | Bevel Washer for 3/4” Bolt Used in Installations Using Angle Iron Bases |
| 8652-134-001 | Terminal Lug, Solderless |
| 9029-077-001 | Bracket, Vacuum Breaker |
| 9029-122-002 | Bracket Soap Box Mounting |
| 9029-122-003 | Ss Bracket, Cover Plate |
| 9029-191-001 | Bracket-retainer, Front Panel |
| 9029-265-001 | Bracket, Terminal-mounting |
| 9046-085-001 | Bracket, Side Panel Under Front Panel |
| 9053-067-001 | Bushing-insulated, 3/4” |
| 9053-067-004 | Bushing, 1” |
| 9053-078-002 | Bushing Taperlock (Driven & Large |
| 9074-267-001 | Cover, Terminal Block |
| 9083-121-001 | Clip-push |
| 9099-012-003 | Chain (Spring Tension) |
| 9451-181-004 | Pin, Groove (3/4) |
| 9451-181-005 | Pin, Groove (1 1/4) |
| 9451-191-001 | Pin, Plain |
| 9451-193-001 | Pin, Guide |
| 9451-196-001 | Pin, Main Drive |
| 9491-009-003 | Rivet |
| 9504-016-001 | Opl Op Cd with Os2 Platform for V Series Washer |
| 9534-298-001 | Spring, Armature Invensys |
| 9534-339-001 | Spring, Drive |
| 9534-350-001 | Spring - Extension |
| 9534-364-001 | Spring, Return |
| 9534-364-002 | Spring, Actuating |
| 9538-157-018 | Spacer Plastic #6x9/16 |
| 9538-157-019 | Spacer Plastic #10x1/2 |
| 9538-157-021 | Spacer, Plastic |
| 9538-192-001 | Spacer Pushbutton (Micro) |
| 9545-008-012 | Screw, Disp. Mtg |
| 9545-008-023 | Screw Fillhdcr 10bx1/2” Guide |
| 9545-008-024 | Screw-5/16, 10abx3/8 |
| 9545-008-026 | Screw, #10b X 1/2 |
| 9545-008-027 | Screw Grn. #10-32x 1/2” |
| 9545-012-008 | Screws #10-32x1/2” (Pnhdcr) |
| 9545-012-017 | Lid Screws #10-32x1/2 Ss |
| 9545-012-020 | Screw, Hx. 10-32 X 1” |
| 9545-012-026 | Bolt,#10-32 X 1 1/4”ss |
| 9545-017-013 | Bolt, 1/2” -13 X 2” Rings to Base |
| 9545-018-013 | Screw, (Side Panel to Base) |
| 9545-018-024 | Screw Taper Bushing 1/4-20x1 |
| 9545-020-001 | Screw 4-40 X 5/8” |
| 9545-020-003 | Screw 4-40 X 1 1/8” |
| 9545-029-009 | Bolt, Top Front Ring 3/8”-16 X 3” |
| 9545-029-011 | Bolt, 3/8”-16 X 2” |
| 9545-030-002 | Screw, to Base-1/4” X 3/4” |
| 9545-031-010 | Screw-phillips, 6abx3/4 |
| 9545-031-011 | Cross Recessed Pan Hd Tapping Screw |
| 9545-044-003 | Screw -hxwshrhdslsems, 6-32 X 3/16 |
| 9545-045-001 | Screw, Mtg #8bx1/4” |
| 9545-045-002 | Screw, Disp.post Mtg |
| 9545-045-007 | Screw-8bx3/4” |
| 9545-045-010 | Screw |
| 9545-046-007 | Screw - Hxwshdsl, 10-24 - 1.25f, Ctd |
| 9545-054-001 | Screw |
| 9545-054-002 | Screw |
| 9545-055-001 | Bolt, Eye (1/4”-20x1/2”) |
| 9545-060-001 | Bolt, 5/8-11x1 1/2 |
| 9545-064-001 | Screw-phillips, 4mx0.7x8mm |
| 9558-025-001 | Strip-terminal Marker |
| 9558-028-001 | Strip-terminal Marking, Injector |
| 9558-028-002 | Terminal Strip Marker |
| 9897-026-004 | Terminal Block Assy, Power |
| 9897-032-002 | Terminal Block-injector |
| 9897-033-002 | Terminal Block |
| 9985-189-001 | Bracket Assy, Slide - Unlock |
Panels & trim (37)
| Part | Description |
|---|---|
| 0935-127-001 | Cap-injector Assy |
| 0935-135-002 | Vacuum Breaker Cap (Red) |
| 6292-006-007 | Key, Top- # 6324 |
| 8502-614-004 | Label High Voltage Warning |
| 8502-619-003 | Label Fusing & Installation |
| 8502-639-001 | Label-warning |
| 8502-666-001 | Label, Injector Assembly |
| 8502-687-001 | 80lb Washer Dispenser Label |
| 8502-716-001 | Label-fuse, 1.5amp |
| 8502-716-002 | Label Fuse 2.5 Amp Rear |
| 8502-745-001 | Label Dispenser (Black) |
| 8502-756-001 | Washer Dispenser Label Black |
| 8502-757-001 | Label, Door Opening-black |
| 8502-759-001 | Label, Warning Risk of Injury-black |
| 8507-759-001 | Label-risk of Injury (Black) |
| 8511-001-002 | Label Quality |
| 9086-017-001 | Catch, Top Panel |
| 9412-224-001 | Nameplate Decal, Control Black |
| 9412-229-001 | Nameplate Decal, Control Black |
| 9444-015-001 | Panel Assy., Back, Lower |
| 9454-736-001 | Panel Top |
| 9454-761-001 | Panel Top Front |
| 9454-762-001 | Panel Top Rear |
| 9454-904-001 | Panel Assy., Back-lower (After 6/2020) |
| 9454-905-001 | Panel Assy., Back, Upper |
| 9545-766-001 | Panel Assy., Back |
| 9552-039-001 | Shim (Side Panel) |
| 9552-042-001 | Shim (Side Panel) |
| 9578-092-005 | Trim Edge Protector |
| 9732-359-002 | Panel, Side (Left or Right) - Stainless |
| 9732-359-003 | Panel, Side (Left or Right) - Stainless |
| 9966-012-002 | Strap Assembly (Side Panel) |
| 9989-456-001 | Panel, Control (Mounts Nameplate) |
| 9989-526-001 | Panel Assy., Back |
| 9989-617-003 | Panel Assy, Front |
| 9989-618-003 | Panel Assy, Front |
| 9989-668-006 | Front Panel Assy. |
Other (85)
| Part | Description |
|---|---|
| 5198-211-002 | Circuit Breaker |
| 6292-006-013 | Key (N561) |
| 8220-062-027 | Wiring Assembly Red 17” |
| 8220-062-028 | Wiring Assembly Blk. 17” |
| 8220-062-032 | Wiring Assembly Red 41” |
| 8220-064-023 | Wiring Assembly Yel. 32” |
| 8220-064-040 | Wiring Assembly Yel. 64” |
| 8220-090-009 | Wiring Assembly Blu/wht |
| 8220-108-007 | Wiring Assembly Wht/brn 8” |
| 8220-128-001 | Wiring Assembly Jumper Yel |
| 8507-330-001 | Transient Voltage Surge Suppressor Infomational |
| 8514-243-001 | Operators Manual |
| 8514-243-002 | Operators Manual |
| 8514-245-001 | Operators Manual |
| 8514-245-002 | Operators Manual |
| 8533-066-001 | Part # |
| 8533-083-001 | Part # |
| 8612-001-001 | Battery |
| 8615-118-001 | Fitting-cross, 1/2” |
| 8652-130-037 | Lug, Grounding |
| 9003-271-001 | Angle Support Trough |
| 9015-008-001 | Armature Invensys |
| 9081-110-001 | Channel-trough Mounting |
| 9081-169-001 | Channel, Rear |
| 9089-017-001 | Coil Assy., 120 V Invensys |
| 9089-051-001 | Coil Mueller |
| 9150-035-001 | Palm Pilot Zire 31 |
| 9150-045-002 | Usb, Thumb Drive, W/file |
| 9183-046-001 | Filter Mueller |
| 9211-021-002 | Guide, Solenoid Invensys |
| 9242-463-004 | Tube, Suds Overflow |
| 9341-046-001 | Link (Open End) |
| 9355-001-001 | Plastic Sleeve, Locator |
| 9375-028-015 | Vfd Delta “e” Drive 208-240v (Before Serial W1.20244.025) |
| 9375-028-020 | Vfd Delta “e” Drive 208-240v (Before Serial W1.20244.025) |
| 9375-036-020 | Vfd Ms300 (After Serial W1.20244.025) |
| 9375-036-022 | Vfd Ms300 (After Serial W1.20244.025) |
| 9456-041-006 | Plastic Plug 7/8” Electrical Connection |
| 9456-041-007 | Cylinder Plug (1.5” Plastic) |
| 9458-285-001 | Support-pcb, 3/8”, Edge Holding |
| 9473-005-001 | Pcb Assembly Mode Lights |
| 9475-002-003 | Flow Restictors |
| 9483-004-002 | Braking Resistors (200 Ohm) |
| 9483-004-003 | Breaking Resistor 160 Ohms |
| 9486-158-001 | Retainer Pushbutton (Micro) |
| 9487-200-004 | Ring, Retaining |
| 9487-200-005 | Ring, Retaining |
| 9487-261-004 | Tub Back Mating Ring |
| 9487-266-001 | Mating Ring Guard Shield |
| 9506-558-001 | Wiring Schematic & Diagram |
| 9506-559-001 | Wiring Schematic & Diagram |
| 9506-562-001 | Wiring Schematic & Diagram |
| 9506-563-001 | Wiring Schematic & Diagram |
| 9527-002-002 | Standoff Twistlock |
| 9548-285-001 | Support-pcb, 3/8”, Edge Holding |
| 9550-184-001 | Plastic Shield Over Main Pcb |
| 9574-252-002 | Softner Siphon Tube (Plastic) |
| 9610-001-001 | Vacuum Breaker |
| 9635-022-001 | Mode Light Backing Window |
| 9732-353-001 | Kit to Add Front Soap Dish |
| 9732-353-003 | Kit to Remove Front Soap Dish |
| 9794-001-001 | Light, Led,add Bleach As- |
| 9806-015-001 | Data Cable |
| 9806-015-003 | Data Cable (56”) |
| 9806-026-001 | Data Cable Ms300 V4 |
| 9806-026-002 | Data Cable, Ms300 (Ms300) |
| 9839-018-001 | Trough Only |
| 9848-136-001 | Cylinder Assy |
| 9848-137-002 | Cylinder Assy |
| 9869-022-001 | Tub & Cylinder Assy Before Serial #535659 |
| 9869-022-003 | Tub & Cylinder Assy After Serial #535659 |
| 9869-027-003 | Tub & Cylinder Assy After Serial #535659 |
| 9883-012-001 | Injection- Tube Assy |
| 9885-012-001 | Injector Assembly |
| 9892-015-001 | Actuator Assembly (Includes 1-10, Rod Not Included) |
| 9892-015-002 | Actuator Assembly (Includes 1-10, Rod Not Included) |
| 9930-150-001 | Outer Tub Assy. |
| 9930-154-001 | Tub Assembly |
| 9930-157-001 | Tub Assembly |
| 9945-125-002 | Base Assy,frame |
| 9945-155-002 | Base Assy,frame |
| 9966-012-001 | Strap Assy (Side to Base) |
| 9974-011-001 | Tub Front |
| 9974-011-002 | Tub Front |
| 9982-383-001 | Plate-drive Mounting |
Part numbers and descriptions as printed in the manufacturer's parts manual. Reference only — no prices or stock.