Dexter A-Series Vended WSAD SWD Washer Parts
Model Family · Source: Dexter parts manual 8533-070-001, 9/21
Controls & electronics (61)
| Part | Description |
|---|---|
| 8711-004-001 | Transformer, Main |
| 9539-461-007 | Switch, Locking Sensing |
| 9539-461-008 | Switch, Latching Sensing |
| 9539-466-005 | Coin Switch |
| 9539-492-001 | Switch, Door Hinge Close (Plunger) |
| 9586-001-001 | Thermoactuator - Door Lock Relay 120v |
| 8220-001-231 | Wire Assy-blk/blu, 6 1/2” |
| 8220-001-235 | Wire Assembly - Orange/ |
| 8220-001-338 | Wire Assembly - Blue |
| 8220-062-001 | Wire Assembly - White/blue |
| 8220-062-025 | Wire Assembly, Red 28" |
| 8220-063-025 | Red Wire (Door Close Switch) |
| 8220-063-026 | Black Wire (Door Close Switch) |
| 8220-117-002 | Wire Assy, Jumper |
| 8220-118-002 | Wire Assembly, Blk (Breaking Resistors) |
| 8220-123-001 | Wire-assy, Jumper, Yellow |
| 8636-018-001 | Fuse 1.5 Amp |
| 8654-117-015 | Clamp, Pressure Switch Hose |
| 8711-004-002 | Transformer, Control 1 |
| 8711-010-001 | Transformer, Step Down (120vac In, Sec-1, 24.3, Sec-2, 2.3vac) |
| 8711-010-002 | Transformer, Secondary |
| 8711-015-001 | Transformer 120/18vac |
| 9008-004-001 | Door Switch Actuator |
| 9008-005-001 | Actuator, Latching Switch |
| 9008-006-003 | Actuator, Switch Locking |
| 9029-163-001 | Bracket Switch |
| 9035-060-003 | Pushbutton Control (Coin) |
| 9035-062-001 | Pushbutton Control (Coin)[blue] |
| 9035-062-002 | Pushbutton Control (Coin)[black] |
| 9041-087-001 | Switch Box |
| 9200-001-002 | Fuseholder |
| 9242-175-005 | Hose, Pressure Switch |
| 9473-006-001 | Pcb Assembly Relay Main |
| 9473-009-005 | Pcb Assembly Control /display |
| 9473-009-008 | Main Control Board |
| 9487-273-002 | Masking Ring (Push Button Switchstyle) |
| 9538-182-001 | Spacer Sensor |
| 9539-490-001 | Switch, Pressure |
| 9539-497-001 | Coin Switch - Small Terminals |
| 9550-159-001 | Shield, Door Switch |
| 9550-169-003 | Shield, Switch |
| 9627-747-002 | Harness Power Terminal Block |
| 9627-795-004 | Wiring Harness Watervalve/p19 |
| 9627-816-002 | Wiring Harness, Door Lock P15/p4 |
| 9627-817-001 | Wiring Harness, Coindrop Mech |
| 9627-818-001 | Wiring Harness P20/p21 |
| 9627-819-001 | Wiring Harness P8/p16 |
| 9627-820-001 | Wiring Harness, Drain,thermo,doorsol P17 |
| 9627-821-001 | Wiring Harness Led Pcb |
| 9627-822-001 | Harness Assembly, Pressure Switch |
| 9627-826-001 | Harness-extention, Transformer |
| 9627-827-002 | Harness, Easycard V&a-reader All Models |
| 9627-845-001 | Harness for Electronic Coin |
| 9631-381-018 | Wire Assembly, P12, Red 7" |
| 9732-223-002 | Switch Assembly Emergency Stop (Includes Wire Harness) |
| 9732-314-001 | Kit-pressure Sensor, Electronic |
| 9732-315-001 | Kit-replacement, Pressure Sensor (Only) |
| 9801-089-001 | Door Closure Switch Assembly |
| 9857-156-001 | Trough Assy,controls 208-240 Volt |
| 9857-156-004 | Controlsassembly -trough |
| 9950-060-002 | Ring, Masking W Door Switch Hole |
Water valves & plumbing (28)
| Part | Description |
|---|---|
| 9379-183-012 | Valve, Water Inlet (Includes 1 Thru 6) |
| 9379-187-004 | Valve, Drain |
| 9379-202-001 | Drain Valve 3” |
| 8641-242-000 | Washer, Inlet Hose (Furnished) |
| 8654-117-009 | Clamp, Tub End |
| 8654-117-014 | Clamp |
| 8654-117-018 | Clamp, Hose Overflow to Drain |
| 8654-117-019 | Clamp for Motor Bushing |
| 9064-070-001 | Body, Valve (W/ball) |
| 9118-049-002 | Diaphragm Invensys (Viton) |
| 9118-049-003 | Diaphragm Invensys (Epdm Nsf) |
| 9118-054-001 | Diaphragm Mueller |
| 9242-449-004 | Hose, Overflow |
| 9242-457-001 | Hose, Drain Valve to Tube |
| 9242-458-001 | Hose, Vacuum Breaker to Tub |
| 9242-463-005 | Hose, Overflow Vent Top |
| 9242-464-001 | Hose, Tub to Drain Valve |
| 9379-192-001 | Dual Coil Water Valve Mueller |
| 9379-192-002 | Valve Water Body Complete(no Coil) |
| 9545-014-012 | Screw, Valve to Bracket 5/16-18x1 1/4 |
| 9555-056-001 | Screen, Inlet End of Valve |
| 9565-003-001 | Strainer, Inlet Hose (Furnished) |
| 9785-001-001 | Diaphragm Assembly Mueller Includes |
| 9807-087-001 | Soap Dispenser (No Lid) |
| 9915-122-002 | Tube Assy, Drain |
| 9950-056-002 | Ring Assy.clamp Tub Mtg.- Rear |
| 9987-104-001 | Lid Assembly Dispenser |
| 9990-027-011 | Hose, Water Supply 3/8” I.d. X 48” |
Drive & motor (29)
| Part | Description |
|---|---|
| 9029-027-005 | Strap Bracket, Motor Tension (Before Serial # 525645) |
| 9029-206-002 | Strap Bracket, Motor Tension |
| 9036-159-004 | Bearing, Rear (Small) |
| 9036-159-005 | Bearing, Front (Large) |
| 9040-077-003 | Belt, Motor Drive |
| 9053-074-002 | Bushing, Motor -support |
| 9053-082-001 | Motor Bushing (Rubber) |
| 9076-052-002 | Collar-shaft, W/set Screws |
| 9241-180-002 | Housing, Bearing |
| 9376-319-001 | Motor-drive, 2hp. |
| 9452-538-001 | Plate, Motor Mtg |
| 9453-168-003 | Pulley, Driven |
| 9453-170-003 | Pulley, Motor |
| 9487-238-003 | Ring, Bearing Retainer |
| 9497-222-006 | Rod, Motor Mtg |
| 9534-319-002 | Spring, Belt Tension |
| 9537-195-002 | Shaft, Door Locking |
| 9538-149-001 | Plate (Spacers Needed for Replacement Motor Mtg. Plate) |
| 9538-167-001 | Spacer, Bearing |
| 9545-028-015 | Set Screw,sq.hd(motor Pulley) |
| 9732-219-004 | Coin Bearing & Seal Kit |
| 9732-219-005 | Bearings and Seal Kit |
| 9732-283-003 | Gear Motor Kit |
| 9803-186-001 | Housing, Bearing- Assembly (Items #2-#6) |
| 9848-120-001 | Cylinder Assembly, (Includes Spider) |
| 9913-134-003 | Shaft Assy, Locking (Includes 4 Thru 7) |
| 9914-137-011 | Motor & Gear Assembly 120v |
| 9985-011-009 | Door Lock Gear Motor Solenoid Assembly |
| 9991-056-002 | Support Arm Assy, Bearing Housing |
Door & lock (36)
| Part | Description |
|---|---|
| 8650-012-003 | Lock, Top (W/key) |
| 9206-419-001 | Gasket, Loading Door |
| 9244-080-003 | Handle, Door |
| 9885-024-001 | Door Lock Latching Assembly |
| 8640-400-003 | Nut-wiz Lock, 5/16-18 |
| 8640-413-002 | Nut, Hinge to Door |
| 8640-416-005 | Nut, Flange Locking 7/16” |
| 8640-417-005 | Nut, Wiz Lock |
| 8641-582-009 | Lock Washer, 5/16 |
| 9051-053-001 | Bumper Loading Door |
| 9095-040-002 | Cam, Locking |
| 9095-042-001 | Cam, Lock-top |
| 9244-086-005 | Handle, Lower Service Door |
| 9306-025-001 | Top Lock Key #6324 |
| 9451-181-006 | Pin, Door Handle (Groove) |
| 9487-265-002 | Loading Door, Ring |
| 9534-360-002 | Spring, Lock Cam |
| 9540-036-001 | Stop, Door Lock Solenoid |
| 9545-005-002 | Leaf Assembly, Hinge Bottom |
| 9545-005-004 | Leaf Assembly, Hinge Top (Push Button Style) |
| 9545-018-014 | Screw, Lock Mtg 1/4”-20 X 3/4” |
| 9545-056-002 | Thrd Form Screw, Door Mtg 5/16” X 5/8” |
| 9550-030-001 | Door Hinge Assembly Mounts to Tub Front |
| 9552-037-001 | Shim, Door Lock, Thin |
| 9635-016-001 | Window, Loading Door |
| 9732-139-001 | Kit - Door Gasket Expander Kit (Small) |
| 9732-139-002 | Kit - Door Gasket Expander Kit (Large) |
| 9732-344-001 | Lock with Spacer |
| 9732-346-002 | Pawl, Locking |
| 9845-005-002 | Leaf Assembly-hinge, Bottom |
| 9845-005-003 | Top, Loading Door Leaf Hinge with Pin |
| 9922-011-009 | **some Older Machines May Have the Door Lock Solenoid Assembly P/n |
| 9950-030-001 | Door Hinge (Mounts to Tub) |
| 9960-274-004 | Loading Door, Complete ( Includes #1thru #10) |
| 9960-286-006 | Door, Lower Service Assembly (W/handle) |
| 9982-346-001 | Plate Assy, Door Lock |
Coin & payment (17)
| Part | Description |
|---|---|
| 8545-051-003 | Special Tool for Removing Coin Acceptor |
| 9021-010-001 | Electronic Coin Acceptor (Usa & Canada) |
| 9021-013-001 | Acceptor-coin,electronic |
| 9021-092-002 | Optical Coin Acceptor |
| 9119-025-001 | Coin Acceptor Chute with Penny |
| 9119-025-002 | Coin Acceptor Chute Without |
| 9486-145-001 | Retainer, Coin Acceptor |
| 9486-155-001 | Retainer Coin Acceptor, Electronic |
| 9506-108-001 | Wiring Schematic, (Easy Card) |
| 9506-109-001 | Wiring Diagram (Easy Card) |
| 9545-053-002 | Coin Drop Screws |
| 9732-213-007 | Kit - Electronic Acceptor Conversion for Wsad (Uas & Canada) Contact the |
| 9797-007-003 | Card Reader Assembly Complete |
| 9797-008-001 | Card Reader Assembly Complete |
| 9807-099-001 | Coin Box, Blue |
| 9807-099-003 | Coin Box Assy, Black Small |
| 9942-028-003 | Coin Vault Assy, Coin |
Seals & gaskets (7)
| Part | Description |
|---|---|
| 8538-151-001 | Sealing Compound |
| 9206-422-001 | Soap Box Mounting Gasket |
| 9532-134-001 | Seal, V Packer |
| 9532-140-002 | Seal, Primary |
| 9532-140-006 | Seal, Small |
| 9732-327-001 | Kit - Seal Replacement |
| 9950-048-001 | Ring, Seal Mounting |
Hardware (82)
| Part | Description |
|---|---|
| 8639-994-001 | Screw |
| 8640-399-001 | Nut-spring |
| 8640-399-004 | Nut, Spring |
| 8640-399-007 | Nut, Spring |
| 8640-401-001 | Nut, Twin 4-40 |
| 8640-411-002 | Nut Elasticstop #6-32 |
| 8640-411-003 | Nut Hexkeps #6-32 |
| 8640-412-005 | Nuts-hexkeps, #8-32 |
| 8640-413-004 | Nut, Elastic Stop 10-32 |
| 8640-413-006 | Nut Hex Elasticstop #10-32 Ss |
| 8640-414-003 | Nut, 1/4 Elastic Stop |
| 8640-424-002 | Nut Hexelasticstop #4-40 |
| 8640-425-001 | Nut, Hex 5/8-11 |
| 8640-426-001 | Nut, 9/32 - 28 Hex |
| 8640-442-001 | Nut, Spring-to Front Panel |
| 8641-569-003 | Washer, Spring |
| 8641-581-006 | Washer #10 |
| 8641-581-008 | Washer Flat 5/16 |
| 8641-581-030 | Washer, Flat |
| 8641-581-031 | Washer |
| 8641-581-032 | Washer -flat |
| 8641-581-038 | Washer, Flat 5/8” |
| 8641-582-005 | Lockwasher #6 Exttooth |
| 8641-582-006 | Lockwasher #10 |
| 8641-582-007 | Lockwasher 1/4” Ext Tooth |
| 8641-582-018 | Lockwasher-exttooth, 5/8 |
| 8641-582-019 | Lockwasher |
| 8641-584-001 | Washer |
| 8641-586-002 | Bevel Washer for 5/8” Bolt Used in Installations Using Angle Iron Bases |
| 8641-586-003 | Bevel Washer for 3/4” Bolt Used in Installations Using Angle Iron Bases |
| 8652-134-001 | Terminal Lug, Solderless |
| 9029-121-001 | Bracket, Vacuum Breaker |
| 9029-122-002 | Bracket Soap Box Mounting |
| 9053-067-003 | Bushing Insulating |
| 9451-181-004 | Pin, Groove (3/4) |
| 9451-181-005 | Pin, Groove (1 1/4) |
| 9451-193-001 | Pin, Guide |
| 9451-196-001 | Pin, Main Drive |
| 9495-031-010 | Screw, Mtg 6abx3/4” |
| 9534-298-001 | Spring, Armature Invensys |
| 9534-339-001 | Spring, Drive |
| 9534-364-001 | Spring, Return |
| 9534-364-002 | Spring, Actuating |
| 9537-157-018 | Spacer Plastic #6x9/16 |
| 9538-157-004 | Spacer, Plastic |
| 9538-157-018 | Spacer Plastic #6x9/16 |
| 9538-157-020 | Spacer Plastic #8x5/16 E-stop |
| 9538-166-004 | Spacer, Metal |
| 9538-178-001 | Spacer Pushbutton (Micro) |
| 9545-008-001 | Screw, 10bx1/4 |
| 9545-008-009 | Screw, Torx Head- 10ab X 3/4, Blue |
| 9545-008-020 | Screw, Box Cover 10 Ab X 3/4" |
| 9545-008-026 | Screw, #10b X 1/2 |
| 9545-008-027 | Screw Grn. #10-32x 1/2” |
| 9545-008-036 | Screw, Torx Head- 10ab X 3/4, Black |
| 9545-010-001 | Screw, Cross Recessed |
| 9545-012-017 | Lid Screws #10-32x1/2 Ss |
| 9545-012-020 | Screw, Hx. 10-32 X 1” |
| 9545-014-009 | Screw, 5/16-18x3/4 |
| 9545-017-016 | Bolt, Top Front Ring 5/8” X 3” |
| 9545-018-023 | Screw |
| 9545-020-001 | Screw 4-40 X 5/8” |
| 9545-020-003 | Screw 4-40 X 1 1/8” |
| 9545-030-002 | Screw, to Base-1/4” X 3/4” |
| 9545-031-011 | Cross Recessed Pan Hd Tapping Screw |
| 9545-045-001 | Screw, Mtg #8bx1/4” |
| 9545-045-007 | Screw-8bx3/4” |
| 9545-054-001 | Screw |
| 9545-054-002 | Screw |
| 9545-055-002 | Bolt, Eye (1/4”-20x1/2”) |
| 9545-059-002 | Bolt, 7/16-14 X 2 |
| 9545-059-003 | Screw, 7/16-14x1 1/2 |
| 9545-060-001 | Bolt, 5/8-11x1 1/2 |
| 9545-060-004 | Screw, 5/8”-11 X 2” |
| 9545-061-001 | Screw, Shoulder |
| 9558-025-001 | Strip-terminal Marker |
| 9558-027-001 | Strip, Terminal Marker |
| 9897-033-002 | Terminal Block |
| 9897-034-001 | Terminal Block Assy, Power |
| 9982-318-001 | Bracket, Side Panel Under Front Panel |
| 9985-169-001 | Bracket Ass’y, Solenoid Slide |
| 9985-176-001 | Bracket Assembly (Drive Mounting) |
Panels & trim (27)
| Part | Description |
|---|---|
| 6102-017-001 | Label, Informative |
| 6292-006-007 | Key, Top- # 6324 |
| 8502-614-005 | Label-warning,highvoltage |
| 8502-619-004 | Label Fusing & Installation |
| 8502-649-001 | Label - Connection Electrical |
| 8502-687-001 | 80lb Washer Dispenser Label |
| 8502-715-001 | Label “express” , Soap Dispenser |
| 8502-716-001 | Label-fuse, 1.5amp |
| 8502-722-001 | Label Warning Risk of Injury |
| 8502-722-002 | Label Warning Risk of Injury |
| 8502-723-001 | Label, Door Opening (Blue) |
| 8502-730-001 | Label, Warning |
| 8502-741-001 | Label Warning Risk of Injury |
| 8502-742-001 | Label, Door Opening (Black) |
| 8502-745-001 | Label Dispenser (Black) |
| 9412-143-001 | Nameplate Decal, Control Panel |
| 9412-152-001 | Nameplate,control Panel (One Piece) |
| 9412-203-001 | Nameplate Decal, Control Panel, Black |
| 9452-725-001 | Stop Button Mounting Plate |
| 9454-714-001 | Panel Assy., Back |
| 9454-717-001 | Panel Top Rear |
| 9989-470-002 | Panel Top, Front, Painted |
| 9989-493-002 | Panel, Right Side-painted |
| 9989-494-002 | Panel, Left Side - Painted |
| 9989-505-001 | Panel Assy, Front |
| 9989-506-001 | Panel Assembly (Panel Only) |
| 9989-551-001 | Panel Assy, Front |
Other (55)
| Part | Description |
|---|---|
| 5198-211-004 | Circuit Breaker, 1.5 Amp |
| 8220-062-027 | Wiring Assembly Red 17” |
| 8220-062-028 | Wiring Assembly Blk. 17” |
| 8220-064-023 | Wiring Assembly Yel. 32” |
| 8220-090-009 | Wiring Assembly Blu/wht |
| 8507-330-001 | Transient Voltage Surge Suppressor Infomational |
| 8507-367-002 | Instructions, Installation |
| 8514-198-001 | Booklet Owners |
| 8533-070-001 | Part # |
| 8545-051-002 | Torx#20 |
| 8612-001-001 | Battery |
| 9015-008-001 | Armature Invensys |
| 9081-131-001 | Channel, Rear |
| 9089-017-001 | Coil Assy., 120 V Invensys |
| 9089-036-004 | Stator and Coil Assembly |
| 9089-051-001 | Coil Mueller |
| 9183-046-001 | Filter Mueller |
| 9211-021-002 | Guide, Solenoid Invensys |
| 9375-015-014 | Kit, Replacement for |
| 9456-041-006 | Plastic Plug 7/8” Electrical Connection |
| 9456-041-007 | Cylinder Plug (1.5” Plastic) |
| 9473-005-001 | Pcb Assembly Mode Lights |
| 9475-002-003 | Flow Restictors |
| 9483-004-002 | Braking Resistors (200 Ohm) |
| 9486-150-001 | Retainer Pushbutton (Micro) |
| 9487-200-004 | Ring, Retaining |
| 9487-200-005 | Ring, Retaining |
| 9487-234-003 | Ring, Tolerance |
| 9487-261-003 | Tub Back Mating Ring |
| 9497-225-008 | Rod, Pull |
| 9506-122-001 | Wiringlabel-schematic |
| 9506-123-001 | Wiringlabel-diagram |
| 9506-166-001 | Wiringlabel-schematic |
| 9506-167-001 | Wiringlabel-diagram |
| 9536-082-002 | Solenoid 120v 60 Hz |
| 9574-252-002 | Softner Siphon Tube (Plastic) |
| 9610-001-001 | Vacuum Breaker |
| 9635-022-001 | Mode Light Backing Window |
| 9732-231-001 | Vfd Filter Options (3 Phase) |
| 9732-232-001 | Vfd Filter Options (1 Phase) |
| 9732-312-003 | To C Series Kit Blue |
| 9732-312-004 | To C Series Kit Black |
| 9732-345-033 | Kit, Replacement for |
| 9732-354-005 | Cylinder Assy Before Serial # W1.20190.xxx |
| 9794-001-001 | Light, Led,add Bleach As- |
| 9806-013-002 | Cable Assembly 4 Twisted Pair |
| 9806-015-002 | Data Cable |
| 9839-015-001 | Trough Only |
| 9869-011-002 | Tub and Cylinder Assy. |
| 9930-140-001 | Outer Tub Assy |
| 9945-109-002 | Base Assy,frame |
| 9945-110-001 | Mounting Base 4” |
| 9945-111-001 | Mounting Base 6” |
| 9950-051-004 | Ring Assy, Tub Mtg-front |
| 9962-013-003 | Back Ass’y, Tub |
Part numbers and descriptions as printed in the manufacturer's parts manual. Reference only — no prices or stock.