Dexter N-Series OPL WCN55AEH Regular Chassis Non-Express Parts
Model Family · Source: Dexter parts manual 8533-031-001, 6/22
Controls & electronics (35)
| Part | Description |
|---|---|
| 8711-004-001 | Transformer, Main |
| 9539-461-007 | Switch, Locking Sensing |
| 9539-461-008 | Switch, Latching Sensing |
| 9571-360-001 | Timer, Reversing |
| 9586-001-001 | Thermoactuator - Door Lock Relay 120v |
| 3310-041-001 | Light, Cycle Control |
| 5192-285-001 | Relay, 120vac |
| 5192-286-009 | Relay, Spin |
| 8640-399-005 | Nut, Spring- to Control Panel |
| 8640-412-003 | Nut, Switch Mtg |
| 8654-117-015 | Clamp, Pressure Switch Hose |
| 9008-005-001 | Actuator, Latching Switch |
| 9008-006-002 | Actuator, Switch |
| 9029-071-001 | Bracket Pressure Switch Mtg |
| 9107-067-001 | Dial, Timer |
| 9242-175-004 | Hose, Pressure Switch |
| 9307-176-001 | Knob, Timer (W/set Screws) |
| 9376-286-004 | Motor, Timer Rapid Advance |
| 9376-295-004 | Motor, Timer Main Drive |
| 9539-471-001 | Rotary Switch |
| 9539-474-004 | Switch, Red--off/on |
| 9539-474-005 | Switch, White--advance/start |
| 9539-474-006 | Switch, Blue--pause/run |
| 9539-479-007 | Switch, Push-button (Cycle Selector) (Wcn40) |
| 9539-482-001 | Switch, Pressure |
| 9545-012-001 | Screw, Timer Mtg |
| 9545-044-004 | Screw, Reversing Timer |
| 9550-169-003 | Shield, Switch |
| 9571-361-002 | Use Following Items with Timer Part Number |
| 9627-683-001 | Wiring Harness, Drain Valve |
| 9627-688-001 | Wiring Harness, Power Term Blk |
| 9627-691-001 | Wiring Harness, Injector Control |
| 9627-692-001 | Wiring Harness, Main |
| 9627-693-001 | Wiring Harness, Vf Control Shield |
| 9627-694-001 | Wiring Harness, Control |
Water valves & plumbing (35)
| Part | Description |
|---|---|
| 9118-049-001 | Diaphragm Invensys (Epdm) |
| 9206-416-001 | Gasket, Dispenser |
| 9379-183-012 | Valve, Water Inlet (Includes 1 Thru 6) |
| 9379-187-001 | Valve, Drain |
| 9379-202-001 | Drain Valve 3” |
| 8641-242-000 | Washer, Inlet Hose (Furnished) |
| 8654-029-000 | Clamp, Hose |
| 8654-117-001 | Clamp |
| 8654-117-008 | Clamp, Hose Vent |
| 8654-117-014 | Clamp |
| 8654-125-001 | Clamp, Cable- 1/4 Dia |
| 9029-070-001 | Bracket, Drain Valve |
| 9064-070-001 | Body, Valve (W/ball) |
| 9079-122-002 | Clamp, Loading Door Hinge |
| 9081-108-001 | Channel-support,dispenser |
| 9108-095-003 | Door, Dispenser |
| 9118-049-002 | Diaphragm Invensys (Viton) |
| 9118-049-003 | Diaphragm Invensys (Epdm Nsf) |
| 9208-049-001 | Guard Water Valve Terminal |
| 9241-461-001 | Hose, Injector Assy |
| 9242-449-003 | Hose, Overflow to Drain |
| 9242-450-001 | Hose, Despinsor to Tub |
| 9242-453-007 | Hose, Hot, Vac. Brkr. Dispenser |
| 9242-453-015 | Hose, Vac. Brkr. to Rinse Disp.12 5/16” |
| 9242-453-018 | Hose-water,29” 1/2 I.d |
| 9242-453-019 | Hose, Vac. Brkr. to Rinse Dis |
| 9242-457-001 | Hose, Drain Valve to Tube |
| 9242-459-001 | Hose, Tub to Drain Valve |
| 9242-461-001 | Hose, Vacuum Breaker to Tub Injection Tube |
| 9555-056-001 | Screen, Inlet End of Valve |
| 9565-003-001 | Strainer, Inlet Hose (Furnished) |
| 9732-108-002 | Dispenser |
| 9915-120-002 | Tube Assy, Drain |
| 9950-053-002 | Ring Assy.clamp Tub Mtg. to |
| 9990-027-011 | Hose, Water Supply 3/8” I.d. X 48” |
Drive & motor (26)
| Part | Description |
|---|---|
| 9040-079-002 | Drive Belt |
| 8640-418-003 | Nut 3/4”-10 (Bearing Housing to Frame) |
| 8641-582-014 | Lockwasher (End of Motor Rod) |
| 9029-027-004 | Strap, Motor Tension |
| 9036-159-005 | Bearing, Front (Large) |
| 9036-159-006 | Bearing, Front (Small) |
| 9053-077-001 | Split Taperbushing (Motor Pulley) |
| 9076-052-002 | Collar-shaft, W/set Screws |
| 9241-181-004 | Housing, Bearing |
| 9376-298-001 | Drive Motor |
| 9452-538-001 | Plate, Motor Mtg |
| 9453-175-002 | Pulley, Motor |
| 9453-176-001 | Pulley, Driven |
| 9453-176-005 | Pulley, Driven |
| 9487-238-004 | Ring, Bearing Retainer |
| 9497-222-004 | Rod, Motor Mtg |
| 9534-151-000 | Spring, Belt Tension |
| 9537-195-002 | Shaft, Door Locking |
| 9538-149-001 | Plate (Spacers Needed for Replacement Motor Mtg. Plate) |
| 9538-170-001 | Spacer, Bearing |
| 9545-029-005 | Screw (End of Motor Rod) |
| 9545-057-002 | Screw-hex Cap, 3/4”-10 X 3” (Bearing Housing to Frame) |
| 9545-059-004 | Bolt, Tub End of Bearing Housing (7/16-14x1), Bolt From Inside Tub |
| 9803-187-001 | Housing, Bearing- Assembly (Items #2-#6) |
| 9913-134-003 | Shaft Assy, Locking (Includes 4 Thru 7) |
| 9914-137-001 | Motor & Gear Train |
Door & lock (31)
| Part | Description |
|---|---|
| 8650-012-003 | Lock, Top (W/key) |
| 9206-419-001 | Gasket, Loading Door |
| 9244-080-003 | Handle, Door |
| 8640-413-002 | Nut, Hinge to Door |
| 8641-582-009 | Lock Washer, 5/16 |
| 9029-073-001 | Bracket, (Door Locking Sole- |
| 9095-038-001 | Cam, Lock-top |
| 9095-040-001 | Cam, Locking |
| 9108-099-001 | Door, Lower Service |
| 9244-081-003 | Handle (Bumper Guard) |
| 9306-025-001 | Top Lock Key #6324 |
| 9450-002-002 | Pawl, Locking |
| 9451-181-006 | Pin, Door Handle (Groove) |
| 9451-184-003 | Pin, Loading Door Hinge |
| 9467-025-001 | Post, Door Mounting |
| 9487-230-001 | Loading Door, Ring |
| 9534-360-002 | Spring, Lock Cam |
| 9540-033-002 | Stop, Door Lock Solenoid |
| 9545-018-014 | Screw, Lock Mtg 1/4”-20 X 3/4” |
| 9545-056-001 | Screw, Loading Door Mtg |
| 9552-036-001 | Shim, Loading Door Hinge (Thin) |
| 9552-036-002 | Shim, Loading Door Hinge, Thick |
| 9552-037-001 | Shim, Door Lock, Thin |
| 9552-037-002 | Shim, Door Lock, Thick |
| 9635-016-001 | Window, Loading Door |
| 9732-139-001 | Kit - Door Gasket Expander Kit (Small) |
| 9732-139-002 | Kit - Door Gasket Expander Kit (Large) |
| 9922-011-001 | Solenoid Ass’y, Door Locking |
| 9955-029-001 | Hinge Assy, Loading Door |
| 9960-259-002 | Loading Door, Complete (Includes 1 Thru 10) |
| 9982-284-001 | Plate Assy, Door Lock |
Coin & payment (1)
| Part | Description |
|---|---|
| 9545-053-002 | Coin Drop Screws |
Seals & gaskets (6)
| Part | Description |
|---|---|
| 9206-100-001 | Gasket, Light |
| 9206-421-002 | Gasket, Tub Front |
| 9532-134-001 | Seal, V Packer |
| 9532-140-007 | Seal, Small V85a |
| 9532-140-008 | Seal, Large V140a |
| 9950-052-001 | Ring, Seal Mounting |
Hardware (96)
| Part | Description |
|---|---|
| 9545-008-014 | Screw, Flat Head- Front to Sides |
| 8639-621-007 | Screw, Mtg |
| 8639-994-001 | Screw |
| 8640-399-004 | Nut, Spring |
| 8640-399-007 | Nut, Spring |
| 8640-399-008 | Nut, Spring |
| 8640-399-009 | Nut, Spring |
| 8640-401-001 | Nut, Twin 4-40 |
| 8640-411-002 | Nut Elasticstop #6-32 |
| 8640-411-003 | Nut Hexkeps #6-32 |
| 8640-412-005 | Nuts-hexkeps, #8-32 |
| 8640-413-004 | Nut, Elastic Stop 10-32 |
| 8640-414-003 | Nut, 1/4 Elastic Stop |
| 8640-414-006 | Nut, Hex 1/4-20 Unc |
| 8640-415-001 | Nut Wcad 3/8”-16 |
| 8640-417-002 | Nut, 1/2-13 |
| 8640-426-001 | Nut, 9/32 - 28 Hex |
| 8641-569-003 | Washer, Spring |
| 8641-581-006 | Washer #10 |
| 8641-581-008 | Washer Flat 5/16 |
| 8641-581-018 | Washer, Flat 1/4 |
| 8641-581-026 | Washer -flat |
| 8641-581-030 | Washer, Flat |
| 8641-581-031 | Washer |
| 8641-581-033 | Washer, Flat |
| 8641-581-034 | Washer, Flat |
| 8641-582-003 | Washer, 3/8” |
| 8641-582-006 | Lockwasher #10 |
| 8641-582-007 | Lockwasher 1/4” Ext Tooth |
| 8641-582-016 | Lockwasher - Inttooth, 1” |
| 8641-582-020 | Lockwasher-exttooth, 3/4 |
| 8641-584-001 | Washer |
| 8641-585-001 | Washer, Finish |
| 8652-134-001 | Terminal Lug, Solderless |
| 9029-035-001 | Bracket; S0wiitch |
| 9029-069-001 | Bracket, Vacuum Breaker |
| 9053-076-001 | Bushing, Taper |
| 9053-078-002 | Bushing Taperlock (Driven & Large |
| 9099-012-001 | Chain, Spring Tension |
| 9451-181-004 | Pin, Groove (3/4) |
| 9451-181-005 | Pin, Groove (1 1/4) |
| 9451-191-001 | Pin, Plain |
| 9451-193-001 | Pin, Guide |
| 9451-196-001 | Pin, Main Drive |
| 9534-298-001 | Spring, Armature Invensys |
| 9534-339-001 | Spring, Drive |
| 9534-364-001 | Spring, Return |
| 9534-364-002 | Spring, Actuating |
| 9538-157-004 | Spacer, Plastic |
| 9538-157-006 | Spacer, Knob |
| 9538-165-001 | Spacer |
| 9538-166-004 | Spacer, Metal |
| 9545-008-001 | Screw, 10bx1/4 |
| 9545-008-005 | Screw |
| 9545-008-012 | Screw, Disp. Mtg |
| 9545-008-023 | Screw Fillhdcr 10bx1/2” Guide |
| 9545-008-024 | Screw-5/16, 10abx3/8 |
| 9545-008-025 | Screw, #10 |
| 9545-008-026 | Screw, #10b X 1/2 |
| 9545-010-001 | Screw, Cross Recessed |
| 9545-012-003 | Screw-phillips, 10-32x1/2 Chrome |
| 9545-012-020 | Screw, Hx. 10-32 X 1” |
| 9545-014-009 | Screw, 5/16-18x3/4 |
| 9545-017-003 | Bolt, Top Front Ring |
| 9545-017-013 | Bolt, 1/2” -13 X 2” Rings to Base |
| 9545-018-013 | Screw, (Side Panel to Base) |
| 9545-018-020 | Screw 1/4x3 |
| 9545-018-021 | Screw |
| 9545-020-001 | Screw 4-40 X 5/8” |
| 9545-020-003 | Screw 4-40 X 1 1/8” |
| 9545-029-009 | Bolt, Top Front Ring 3/8”-16 X 3” |
| 9545-029-011 | Bolt, 3/8”-16 X 2” |
| 9545-030-002 | Screw, to Base-1/4” X 3/4” |
| 9545-031-003 | Screw-hxwshdsl,6bx3/8 |
| 9545-031-010 | Screw-phillips, 6abx3/4 |
| 9545-031-011 | Cross Recessed Pan Hd Tapping Screw |
| 9545-045-001 | Screw, Mtg #8bx1/4” |
| 9545-045-002 | Screw, Disp.post Mtg |
| 9545-045-007 | Screw-8bx3/4” |
| 9545-045-010 | Screw |
| 9545-048-001 | Screw-hxhdsltdmach,12abx1/2 |
| 9545-054-002 | Screw |
| 9545-055-001 | Bolt, Eye (1/4”-20x1/2”) |
| 9545-061-001 | Screw, Shoulder |
| 9545-413-002 | Nut |
| 9558-021-001 | Strip, Terminal Marker |
| 9558-022-001 | Strip, Terminal Marker |
| 9558-025-001 | Strip-terminal Marker |
| 9558-027-001 | Strip, Terminal Marker |
| 9558-028-001 | Strip-terminal Marking, Injector |
| 9897-028-001 | Terminal Block, 3 Position |
| 9897-029-001 | Terminal Block Assy, 12 Lug |
| 9897-032-002 | Terminal Block-injector |
| 9897-033-001 | Terminal Block, 4 Position |
| 9897-034-001 | Terminal Block Assy, Power |
| 9985-169-001 | Bracket Ass’y, Solenoid Slide |
Panels & trim (12)
| Part | Description |
|---|---|
| 8502-614-004 | Label High Voltage Warning |
| 8502-619-004 | Label Fusing & Installation |
| 8502-624-002 | Label, Door Opening |
| 8502-629-007 | Label, Switch |
| 8502-647-001 | Label, Connections- Injector |
| 8502-649-001 | Label - Connection Electrical |
| 9412-092-001 | Nameplate, Control Panel |
| 9454-671-002 | Panel Assy, Front |
| 9454-672-001 | Panel, Side (Left or Right)stainless |
| 9454-673-001 | Panel, Top |
| 9989-454-001 | Panel, Control (Mounts Nameplate) |
| 9989-455-001 | Panel Assy., Back |
Other (37)
| Part | Description |
|---|---|
| 9536-074-001 | Solenoid 120v 60 Hz |
| 9885-023-001 | Lockassy, Complete (Includes #1 Thru #22) |
| 5198-211-004 | Circuit Breaker, 1.5 Amp |
| 8533-031-001 | Part # |
| 8545-056-001 | Special Tool for Adjusting Spacing Between |
| 8615-104-039 | Pipe Plug |
| 8649-031-000 | Ring, Retaining |
| 8652-130-037 | Lug, Grounding |
| 9003-238-001 | Angle, Drive Mtg Lh |
| 9003-238-002 | Angle, Drive Mtg Rh |
| 9015-008-001 | Armature Invensys |
| 9059-063-002 | Band Edge Protector |
| 9081-109-001 | Channel, Rear |
| 9081-110-001 | Channel-trough Mounting |
| 9089-017-001 | Coil Assy., 120 V Invensys |
| 9211-021-002 | Guide, Solenoid Invensys |
| 9341-046-001 | Link (Open End) |
| 9355-001-001 | Plastic Sleeve, Locator |
| 9375-001-002 | Drive, Vf-120g |
| 9456-041-006 | Plastic Plug 7/8” Electrical Connection |
| 9483-004-001 | Resistor, Braking |
| 9487-200-004 | Ring, Retaining |
| 9487-200-005 | Ring, Retaining |
| 9487-254-001 | Ring, Masking |
| 9497-225-006 | Rod, Pull |
| 9544-041-002 | Strap - Bead Tie |
| 9552-013-001 | Shim, Thin |
| 9552-013-002 | Shim, Thick |
| 9610-001-001 | Vacuum Breaker |
| 9627-690-001 | Vf Power Drive |
| 9848-116-001 | Cylinder, Assy |
| 9883-005-001 | Injection- Tube Assy |
| 9930-138-001 | Tubassy |
| 9945-101-002 | Base Assy, Frame |
| 9950-054-004 | Mating Ring Guard Shield |
| 9966-012-001 | Strap Assy (Side to Base) |
| 9974-007-001 | Front Ass’y, Tub |
Part numbers and descriptions as printed in the manufacturer's parts manual. Reference only — no prices or stock.