Dexter O-Series OPL WN Large Chassis Express Plus Parts
Model Family · Source: Dexter parts manual 8533-126-001, 1/22
Controls & electronics (69)
| Part | Description |
|---|---|
| 9539-461-007 | Switch, Locking Sensing |
| 9539-461-008 | Switch, Latching Sensing |
| 9539-492-001 | Switch, Door Hinge Close (Plunger) |
| 8220-057-035 | Wire Assy, Brown 3” |
| 8220-057-036 | Wire Assy Red, 3” |
| 8220-062-052 | Wireasy-org,71/2" |
| 8220-062-053 | Wire Assembly, Wht/org |
| 8220-062-059 | Wireasy-red,71/2" |
| 8220-063-047 | Wireasy-blu (Door Close Switch) |
| 8220-063-048 | Wireasy-blu/wht (Door Close Switch) |
| 8220-063-049 | Wire-assy-blu, 23” |
| 8220-063-050 | Wireasy-blu/wht (Door Close Switch) |
| 8220-063-051 | Blue Wire Assembly - Door Switch |
| 8220-063-052 | Blue/wht Wire Assembly - Door Switch |
| 8220-108-012 | Wireasy-red/pnk,8" |
| 8220-108-013 | Wireasy-red/gry,8" |
| 8220-117-002 | Wire Assy, Jumper |
| 8220-119-003 | Wire Assembly, Wht/red, Water Valve |
| 8220-123-002 | Wire Assembly, Wht/red, Water Valve |
| 8220-158-017 | Wireasy,2.0 |
| 8220-158-025 | Model Id Jumper Wire |
| 8220-158-031 | Model Id Jumper Wire |
| 8220-158-032 | Wireasy,2.0, Model Jumper |
| 8220-159-005 | Wireasy-jumper,v2.0,relaypcb |
| 8220-159-006 | Wireasy-jumper,v2.0,relaypcb |
| 8507-449-001 | Instruct-transformerconn,60hz |
| 8636-018-001 | Fuse 1.5 Amp |
| 8636-018-005 | 2.0 Amp Fuse |
| 8654-117-015 | Clamp, Pressure Switch Hose |
| 8711-017-001 | Transformer |
| 9004-007-001 | Anchor-wiretie,adhesive |
| 9008-005-001 | Actuator, Latching Switch |
| 9008-006-003 | Actuator, Switch Locking |
| 9029-163-001 | Bracket Switch |
| 9029-309-001 | Bracket-switch,prox |
| 9035-063-001 | Button-control,2.0,opl |
| 9053-067-002 | Bushing , Wire 7/8 |
| 9150-044-001 | Delta E Drive Display |
| 9200-001-002 | Fuseholder |
| 9242-175-002 | Hose, Pressure Switch |
| 9242-175-007 | Hose, Pressure Switch |
| 9452-823-001 | Plate-wireclips |
| 9501-005-002 | Sensor Assembly |
| 9501-012-002 | Assembly, Vibration Sensor (Includes Sensor, Bracket, & |
| 9527-007-001 | Standoff-wire |
| 9538-182-001 | Spacer Sensor |
| 9539-498-001 | Switch-prox,18mm,shld,60" |
| 9539-499-001 | Switch-contactblock,dpst,nc |
| 9550-169-003 | Shield, Switch |
| 9586-001-003 | Thermoactuator - Door Lock Relay 24v |
| 9627-921-001 | Wiringharness-cntrl/relay,v2.0 |
| 9627-922-002 | Wiring Harness, Ctrl/graphics |
| 9627-923-001 | Wiring Harness, Power Supply |
| 9627-926-001 | Wiringharness-ps,t-650-1450 |
| 9627-927-001 | Wiringharness-chemical,v2.0wshr |
| 9627-928-001 | Wiringharness-drsw/vfd,stp |
| 9627-930-001 | Wiringharness-thermist,v2.0wsh |
| 9627-932-001 | Harness-power, Terminal Block |
| 9627-934-001 | Wiring Harness, 15-pin, Non-inj |
| 9627-935-001 | Harness-injection |
| 9627-936-001 | Wiringharness-doorlock |
| 9627-936-003 | Wiringharness-doorlock |
| 9627-952-002 | Wiringharness-ps,t-650-1450 |
| 9635-021-002 | Window-display,lcd(w/gasket) |
| 9732-315-001 | Kit-replacement, Pressure Sensor (Only) |
| 9799-027-001 | Pcbassy-maincontrol |
| 9799-028-001 | Pcbassy-relay |
| 9839-019-001 | Troughassy-control |
| 9857-230-003 | Contrlassy-display,2.0,opl,wsh |
Water valves & plumbing (54)
| Part | Description |
|---|---|
| 9118-049-001 | Diaphragm Invensys (Epdm) |
| 9122-005-004 | Dispenser Soap |
| 9206-416-001 | Gasket, Dispenser |
| 9379-183-012 | Valve, Water Inlet (Includes 1 Thru 6) |
| 9379-202-001 | Drain Valve 3” |
| 8507-268-001 | Inst. Chemical Hose |
| 8641-242-000 | Washer, Inlet Hose (Furnished) |
| 8654-117-008 | Clamp, Hose Vent |
| 8654-117-009 | Clamp, Tub End |
| 8654-117-014 | Clamp |
| 8654-117-017 | Clamp 1 1/4” Ss |
| 8654-117-018 | Clamp, Hose Overflow to Drain |
| 8654-117-019 | Clamp for Motor Bushing |
| 8654-125-005 | Clamp, Cable |
| 9029-162-002 | Bracket, Drain Tube |
| 9064-072-001 | Body, Valve (W/ball) |
| 9081-108-001 | Channel-support,dispenser |
| 9108-095-005 | Door, Dispenser |
| 9118-049-002 | Diaphragm Invensys (Viton) |
| 9118-049-003 | Diaphragm Invensys (Epdm Nsf) |
| 9118-054-001 | Diaphragm Mueller |
| 9118-055-001 | Diaphragm Mueller |
| 9206-425-001 | Det. Dispenser Mtg Gasket to Tub Frnt |
| 9242-449-002 | Hose, Overflow to Drain |
| 9242-449-003 | Hose, Overflow to Drain |
| 9242-450-001 | Hose, Despinsor to Tub |
| 9242-450-003 | Hose, Despinsor to Tub |
| 9242-453-001 | 1/2 Inch Hose, Cut to Length |
| 9242-457-001 | Hose, Drain Valve to Tube |
| 9242-459-001 | Hose, Tub to Drain Valve |
| 9242-461-001 | Hose, Vacuum Breaker to Tub Injection Tube |
| 9242-462-001 | Hose, Injector to Tub Back |
| 9242-464-001 | Hose, Tub to Drain Valve |
| 9242-466-001 | 7/8 Inch Hose, Cut to Length |
| 9379-192-001 | Dual Coil Water Valve Mueller |
| 9379-192-002 | Valve Water Body Complete(no Coil) |
| 9379-194-001 | Single Coil Water Valve Mueller |
| 9379-194-002 | Valve Water Body Complete |
| 9452-813-001 | Mounting Plate Water Valves |
| 9452-814-001 | Mounting Plate Water Valves |
| 9475-002-002 | Flow Restrictors (In Dispenser ) |
| 9495-064-001 | Screw, Valve M4x0.7x8mm |
| 9550-194-001 | Shield Over Water Valves Plastic |
| 9550-195-001 | Shield Over Water Valves Plastic |
| 9555-056-001 | Screen, Inlet End of Valve |
| 9565-003-001 | Strainer, Inlet Hose (Furnished) |
| 9785-001-001 | Diaphragm Assembly Mueller Includes |
| 9807-087-001 | Soap Dispenser (No Lid) |
| 9915-120-004 | Drain Tube |
| 9915-124-002 | Tube Assy, Drain |
| 9950-055-001 | Ring Assy, Tub Mtg-front Clamp |
| 9950-063-001 | Ring Assy, Tub Mtg-front Clamp |
| 9987-104-001 | Lid Assembly Dispenser |
| 9990-027-013 | Hose, Water Supply 5/8” I.d. X 48” |
Drive & motor (41)
| Part | Description |
|---|---|
| 9040-076-005 | Drive Belt |
| 9040-079-003 | Drive Belt |
| 8640-418-003 | Nut 3/4”-10 (Bearing Housing to Frame) |
| 8640-437-001 | Nut 7/8”-9 (Bearing Housing to Frame |
| 8641-588-001 | Washers Spherical 3/4 (Male Half) (Bearing Housing to Frame) |
| 8641-588-002 | Washers Spherical 3/4 (Female Half) (Bearing Housing to Frame) |
| 8641-588-003 | Washers Spherical 7/8” (Male Half) (Bearing Housing to Frame) |
| 8641-588-004 | Washers Spherical 7/8” (Female Half) (Bearing Housing to Frame) |
| 9029-206-001 | Strap Bracket, Motor Tension |
| 9029-206-002 | Strap Bracket, Motor Tension |
| 9036-159-005 | Bearing, Front (Large) |
| 9036-159-006 | Bearing, Front (Small) |
| 9040-079-006 | Drive Belt |
| 9053-077-001 | Split Taperbushing (Motor Pulley) |
| 9053-082-001 | Motor Bushing (Rubber) |
| 9076-052-002 | Collar-shaft, W/set Screws |
| 9189-016-001 | Vfd Cooling Fan |
| 9241-181-004 | Housing, Bearing |
| 9376-308-001 | Drive Motor, 3 Phase |
| 9376-326-002 | Drive Motor, 3 Phase (Inverter Duty) |
| 9452-538-001 | Plate, Motor Mtg |
| 9453-170-003 | Pulley, Motor |
| 9453-173-002 | Pulley, Driven |
| 9453-175-002 | Pulley, Motor |
| 9453-176-006 | Pulley, Driven |
| 9487-238-004 | Ring, Bearing Retainer |
| 9497-222-004 | Rod, Motor Mtg |
| 9534-369-001 | Spring, Belt Tension |
| 9537-195-002 | Shaft, Door Locking |
| 9538-149-001 | Plate (Spacers Needed for Replacement Motor Mtg. Plate) |
| 9538-170-001 | Spacer, Bearing |
| 9545-028-015 | Set Screw,sq.hd(motor Pulley) |
| 9545-057-002 | Screw-hex Cap, 3/4”-10 X 3” (Bearing Housing to Frame) |
| 9545-059-004 | Bolt, Tub End of Bearing Housing (7/16-14x1), Bolt From Inside Tub |
| 9545-066-001 | Screw-hex Cap, 7/8”-10 X 3” (Bearing |
| 9732-219-007 | Bearings and Seal Kit |
| 9803-187-001 | Housing, Bearing- Assembly (Items #2-#6) |
| 9892-015-003 | Door Lock Gear Motor Assembly (60hz Only) |
| 9913-136-001 | Shaft Assembly (Includes #4-7) |
| 9914-137-015 | Motor & Gear Assembly 120v |
| 9914-137-023 | Motor & Gear Train (Complete) |
Door & lock (50)
| Part | Description |
|---|---|
| 8650-012-003 | Lock, Top (W/key) |
| 9206-419-001 | Gasket, Loading Door |
| 9206-431-001 | Door Gasket |
| 9244-091-001 | Handle, Door |
| 9732-347-001 | Kit - Door Lock Assy. & Cam |
| 9885-024-001 | Door Lock Latching Assembly |
| 8640-413-002 | Nut, Hinge to Door |
| 8640-417-005 | Nut, Wiz Lock |
| 8641-582-009 | Lock Washer, 5/16 |
| 9001-063-001 | Arm - Door Lock |
| 9029-204-001 | Bracket Slide Lock |
| 9035-061-002 | Button-emergencystop,w/latch |
| 9051-055-001 | Bumper Loading Door |
| 9095-049-001 | Cam, Lock-top |
| 9095-051-001 | Cam, Locking |
| 9244-086-002 | Handle (Bumper Guard) |
| 9244-086-003 | Handle (Bumper Guard) |
| 9450-003-002 | Pawl, Locking |
| 9452-625-001 | Plate-latch, Top |
| 9467-025-001 | Post, Door Mounting |
| 9487-265-002 | Loading Door, Ring |
| 9487-275-001 | Door Ring 180 Degree Large Hnge |
| 9497-225-015 | Rod, Door Lock |
| 9497-225-017 | Rod, Door Lock |
| 9534-360-002 | Spring, Lock Cam |
| 9538-189-001 | Lock Spacer |
| 9545-014-013 | Screw, Loading Door Hinge Mtg |
| 9545-018-014 | Screw, Lock Mtg 1/4”-20 X 3/4” |
| 9545-056-002 | Thrd Form Screw, Door Mtg 5/16” X 5/8” |
| 9552-036-001 | Shim, Loading Door Hinge (Thin) |
| 9552-037-001 | Shim, Door Lock, Thin |
| 9552-043-001 | Shim Large Door |
| 9635-016-001 | Window, Loading Door |
| 9635-020-001 | Door Glass Window |
| 9732-344-001 | Lock with Spacer |
| 9732-346-001 | Kit - Locking Pawl Replacement |
| 9732-346-002 | Pawl, Locking |
| 9845-005-002 | Leaf Assembly-hinge, Bottom |
| 9845-006-001 | Top Door Hinge Leaf (No Pin) |
| 9845-007-001 | Bottom Door Hinge Leaf |
| 9845-008-001 | Leaf Assembly-hinge, Top |
| 9885-031-001 | Latching Assy, Complete |
| 9955-030-001 | Door Hinge Assembly Mounts to Tub Front |
| 9955-031-001 | Door Hinge Assembly (Mounts to Tub Front) |
| 9960-286-002 | Door, Lower Service (Includes Handle & Rivits) |
| 9960-286-004 | Door, Lower Service, Includes Handle |
| 9960-309-001 | Loading Door, Complete #1-10 |
| 9960-310-001 | Door Assembly Complete |
| 9982-346-001 | Plate Assy, Door Lock |
| 9985-190-001 | Bracket Assy, Slide Lock Actuator |
Coin & payment (2)
| Part | Description |
|---|---|
| 8507-300-001 | Card-warranty(dexter) |
| 9545-053-002 | Coin Drop Screws |
Seals & gaskets (10)
| Part | Description |
|---|---|
| 8538-132-000 | Sealer-pipe |
| 8538-151-002 | Sealing Compound Rtv-45 |
| 9206-421-002 | Gasket, Tub Front |
| 9206-421-004 | Gasket, Tub Front |
| 9532-134-001 | Seal, V Packer |
| 9532-140-007 | Seal, Small V85a |
| 9532-140-008 | Seal, Large V140a |
| 9532-140-012 | Seal, Small V95a |
| 9732-327-001 | Kit - Seal Replacement |
| 9950-052-001 | Ring, Seal Mounting |
Hardware (105)
| Part | Description |
|---|---|
| 9545-008-014 | Screw, Flat Head- Front to Sides |
| 8460-413-002 | Nut, #10-32unf, 2b |
| 8507-448-001 | Instruct-washerinstall |
| 8639-994-001 | Screw |
| 8640-399-007 | Nut, Spring |
| 8640-399-008 | Nut, Spring |
| 8640-401-001 | Nut, Twin 4-40 |
| 8640-411-003 | Nut Hexkeps #6-32 |
| 8640-412-005 | Nuts-hexkeps, #8-32 |
| 8640-413-004 | Nut, Elastic Stop 10-32 |
| 8640-413-006 | Nut Hex Elasticstop #10-32 Ss |
| 8640-414-003 | Nut, 1/4 Elastic Stop |
| 8640-414-006 | Nut, Hex 1/4-20 Unc |
| 8640-415-001 | Nut Wcad 3/8”-16 |
| 8640-426-001 | Nut, 9/32 - 28 Hex |
| 8640-442-001 | Nut, Spring-to Front Panel |
| 8641-222-000 | Special Washer, Rubber |
| 8641-569-003 | Washer, Spring |
| 8641-581-008 | Washer Flat 5/16 |
| 8641-581-018 | Washer, Flat 1/4 |
| 8641-581-026 | Washer -flat |
| 8641-581-030 | Washer, Flat |
| 8641-581-031 | Washer |
| 8641-581-032 | Washer -flat |
| 8641-581-034 | Washer, Flat |
| 8641-581-040 | Washer, Flat |
| 8641-581-043 | Washer-flat .675x2-1/2x1/4 |
| 8641-581-044 | Washer-flat, .781x2-1/2x1/4 |
| 8641-582-003 | Washer, 3/8” |
| 8641-582-006 | Lockwasher #10 |
| 8641-582-007 | Lockwasher 1/4” Ext Tooth |
| 8641-582-018 | Lockwasher-exttooth, 5/8 |
| 8641-582-020 | Lockwasher-exttooth, 3/4 |
| 8641-582-032 | Washer-flat, 5/8” |
| 8641-584-001 | Washer |
| 8641-585-001 | Washer, Finish |
| 8641-586-003 | Bevel Washer for 3/4” Bolt Used in Installations Using Angle Iron Bases |
| 8652-134-001 | Terminal Lug, Solderless |
| 9029-077-001 | Bracket, Vacuum Breaker |
| 9029-122-002 | Bracket Soap Box Mounting |
| 9029-122-003 | Ss Bracket, Cover Plate |
| 9029-265-001 | Bracket, Terminal-mounting |
| 9029-326-001 | Bracket, Terminal-mounting |
| 9046-085-001 | Bracket, Side Panel Under Front Panel |
| 9046-094-001 | Bracket, Side Panel Under Front Panel |
| 9053-067-001 | Bushing-insulated, 3/4” |
| 9053-067-004 | Bushing, 1” |
| 9053-078-002 | Bushing Taperlock (Driven & Large |
| 9074-267-001 | Cover, Terminal Block |
| 9083-121-001 | Clip-push |
| 9083-122-001 | Clip-push |
| 9099-012-003 | Chain (Spring Tension) |
| 9451-181-004 | Pin, Groove (3/4) |
| 9451-181-005 | Pin, Groove (1 1/4) |
| 9451-191-001 | Pin, Plain |
| 9451-193-001 | Pin, Guide |
| 9451-196-001 | Pin, Main Drive |
| 9491-009-003 | Rivet |
| 9534-298-001 | Spring, Armature Invensys |
| 9534-339-001 | Spring, Drive |
| 9534-350-001 | Spring - Extension |
| 9534-364-001 | Spring, Return |
| 9534-364-002 | Spring, Actuating |
| 9538-157-005 | Spacer-pcb,#8x1/8 |
| 9538-157-021 | Spacer, Plastic |
| 9545-008-001 | Screw, 10bx1/4 |
| 9545-008-012 | Screw, Disp. Mtg |
| 9545-008-023 | Screw Fillhdcr 10bx1/2” Guide |
| 9545-008-026 | Screw, #10b X 1/2 |
| 9545-008-027 | Screw Grn. #10-32x 1/2” |
| 9545-012-017 | Lid Screws #10-32x1/2 Ss |
| 9545-012-020 | Screw, Hx. 10-32 X 1” |
| 9545-012-026 | Bolt,#10-32 X 1 1/4”ss |
| 9545-014-009 | Screw, 5/16-18x3/4 |
| 9545-017-013 | Bolt, 1/2” -13 X 2” Rings to Base |
| 9545-018-013 | Screw, (Side Panel to Base) |
| 9545-018-024 | Screw Taper Bushing 1/4-20x1 |
| 9545-020-001 | Screw 4-40 X 5/8” |
| 9545-020-003 | Screw 4-40 X 1 1/8” |
| 9545-029-009 | Bolt, Top Front Ring 3/8”-16 X 3” |
| 9545-029-011 | Bolt, 3/8”-16 X 2” |
| 9545-030-002 | Screw, to Base-1/4” X 3/4” |
| 9545-031-005 | Screw-pnhdcr,6bx3/8 |
| 9545-031-010 | Screw-phillips, 6abx3/4 |
| 9545-031-011 | Cross Recessed Pan Hd Tapping Screw |
| 9545-044-003 | Screw -hxwshrhdslsems, 6-32 X 3/16 |
| 9545-045-001 | Screw, Mtg #8bx1/4” |
| 9545-045-002 | Screw, Disp.post Mtg |
| 9545-045-012 | Screw, Phillips, 8ab X 1/2” |
| 9545-046-007 | Screw - Hxwshdsl, 10-24 - 1.25f, Ctd |
| 9545-054-001 | Screw |
| 9545-054-002 | Screw |
| 9545-055-001 | Bolt, Eye (1/4”-20x1/2”) |
| 9545-057-004 | Bolt, 3/4-10-1 1/2 |
| 9545-060-001 | Bolt, 5/8-11x1 1/2 |
| 9545-060-004 | Screw, 5/8”-11 X 2” |
| 9545-060-005 | Screw-hxcap,5/8-11x3/4 |
| 9545-064-001 | Screw-phillips, 4mx0.7x8mm |
| 9558-025-001 | Strip-terminal Marker |
| 9558-036-001 | Strip-terminal Marking, Injector |
| 9806-024-001 | Cableassy-usb,snapin |
| 9897-026-005 | Terminalblockassembly-power |
| 9897-032-003 | Terminal Block-injector |
| 9897-033-002 | Terminal Block |
| 9985-189-001 | Bracket Assy, Slide - Unlock |
Panels & trim (44)
| Part | Description |
|---|---|
| 0935-127-001 | Cap-injector Assy |
| 0935-135-002 | Vacuum Breaker Cap (Red) |
| 6292-006-007 | Key, Top- # 6324 |
| 8502-614-004 | Label High Voltage Warning |
| 8502-619-003 | Label Fusing & Installation |
| 8502-619-004 | Label Fusing & Installation |
| 8502-639-001 | Label-warning |
| 8502-666-001 | Label, Injector Assembly |
| 8502-669-002 | Label-blank,oneacross(carton) |
| 8502-716-001 | Label-fuse, 1.5amp |
| 8502-716-002 | Label Fuse 2.5 Amp Rear |
| 8502-716-003 | Label-fuse,2a |
| 8502-745-001 | Label Dispenser (Black) |
| 8502-757-001 | Label, Door Opening-black |
| 8502-759-001 | Label, Warning Risk of Injury-black |
| 8502-760-001 | Label-keeppanelinplace |
| 8502-761-001 | Label-warning, Notice |
| 8502-775-001 | Label-waterlevelsettings,opl |
| 8502-776-001 | Label-connections,injection |
| 9086-017-001 | Catch, Top Panel |
| 9412-243-001 | Nameplate Decal, Control Black |
| 9412-245-001 | Nameplate,control Panel (One Piece) Black |
| 9412-259-001 | Nameplate Decal, Control Black |
| 9452-725-001 | Stop Button Mounting Plate |
| 9454-736-001 | Panel Top |
| 9454-850-001 | Panel Top Front |
| 9454-851-001 | Panel Top Rear |
| 9454-872-001 | Panel Assy., Back, Lower |
| 9454-873-001 | Panel Assy., Back, Upper |
| 9552-039-001 | Shim (Side Panel) |
| 9578-092-005 | Trim Edge Protector |
| 9732-223-004 | Kit-emergency Stop, O-series (Includes #x, #y) |
| 9989-526-001 | Panel Assy., Back |
| 9989-563-007 | Panel Top |
| 9989-567-001 | Panel Assy., Back |
| 9989-599-001 | Panel, Control (Mounts Nameplate) |
| 9989-600-001 | Panel, Control (Mounts Nameplate) |
| 9989-615-003 | Panel Assy, Front |
| 9989-617-003 | Panel Assy, Front |
| 9989-644-001 | Panel, Side- Stainless |
| 9989-644-002 | Panel, Side- Stainless |
| 9989-646-001 | Panel, Right Side-stainless |
| 9989-646-002 | Panel, Left Side - Stainless |
| 9989-683-009 | Front Panel |
Other (71)
| Part | Description |
|---|---|
| 8502-653-001 | Installer Installation Instruction |
| 8502-670-001 | Labels-blank,sets of 4 |
| 8514-290-001 | Operators Manual |
| 8533-126-001 | Part # |
| 8615-118-001 | Fitting-cross, 1/2” |
| 9003-368-001 | Angle-support,trough |
| 9015-008-001 | Armature Invensys |
| 9081-155-001 | Channel-trough,mtg |
| 9081-171-001 | Support,trough |
| 9081-172-001 | Chanel-support, Trough |
| 9081-188-001 | Channel-trough,mtg |
| 9089-017-001 | Coil Assy., 120 V Invensys |
| 9089-051-001 | Coil Mueller |
| 9150-045-002 | Usb, Thumb Drive, W/file |
| 9150-054-001 | Dc Power Supply |
| 9183-046-001 | Filter Mueller |
| 9211-021-002 | Guide, Solenoid Invensys |
| 9242-463-004 | Tube, Suds Overflow |
| 9341-046-001 | Link (Open End) |
| 9355-001-001 | Plastic Sleeve, Locator |
| 9375-036-015 | Vfd, Ms300, O2 |
| 9375-037-003 | Vfd, Ms300, O2 |
| 9452-848-001 | Plate Assembly, Drive Mounting |
| 9456-041-006 | Plastic Plug 7/8” Electrical Connection |
| 9456-041-007 | Cylinder Plug (1.5” Plastic) |
| 9467-024-001 | Locator Post |
| 9475-002-003 | Flow Restictors |
| 9483-004-002 | Braking Resistors (200 Ohm) |
| 9483-004-003 | Breaking Resistor 160 Ohms |
| 9487-200-004 | Ring, Retaining |
| 9487-200-005 | Ring, Retaining |
| 9487-234-004 | Tollerence Ring |
| 9487-261-004 | Tub Back Mating Ring |
| 9487-266-001 | Mating Ring Guard Shield |
| 9507-004-001 | Wiringlabel-diagram/inform |
| 9507-011-001 | Wiringlabel-diagram/inform |
| 9508-004-001 | Wiringlabel-schematic |
| 9508-011-001 | Wiringlabel-schematic |
| 9527-002-002 | Standoff Twistlock |
| 9544-040-001 | Strap-tie,adjustableratchet |
| 9548-285-001 | Support-pcb, 3/8”, Edge Holding |
| 9550-184-001 | Plastic Shield Over Main Pcb |
| 9574-252-002 | Softner Siphon Tube (Plastic) |
| 9610-001-001 | Vacuum Breaker |
| 9627-933-001 | Wiringharnes-main,t-650-1450 |
| 9732-353-002 | Kit to Add Front Soap Dish |
| 9732-353-004 | Kit to Remove Front Soap Dish |
| 9806-023-004 | Cable, Data |
| 9806-023-005 | Data Cable Assembly |
| 9848-145-001 | Cylinder Assy |
| 9848-172-001 | Cylinder Assy |
| 9857-243-001 | Contrlsasy-trgh, Opl,60hz |
| 9857-268-001 | Contrlsasy-trgh, Opl,60hz |
| 9869-027-004 | Tub & Cylinder Assy. |
| 9869-027-006 | Tub & Cylinder Assy |
| 9869-035-004 | Tub & Cylinder Assy |
| 9883-005-001 | Injection- Tube Assy |
| 9883-012-001 | Injection- Tube Assy |
| 9930-158-001 | Outer Tub Assy. |
| 9930-169-001 | Tub Assembly |
| 9930-184-003 | Tub Assembly |
| 9945-143-002 | Base Assy,frame |
| 9945-155-002 | Base Assy,frame |
| 9947-032-001 | Channel Assembly Rear |
| 9947-052-001 | Channel Assembly Rear |
| 9966-012-001 | Strap Assy (Side to Base) |
| 9974-011-001 | Tub Front |
| 9974-012-001 | Tub Front |
| 9974-014-002 | Tub Front |
| 9974-019-002 | Tub Front |
| 9982-383-001 | Plate-drive Mounting |
Part numbers and descriptions as printed in the manufacturer's parts manual. Reference only — no prices or stock.