Dexter O-Series OPL WN T-1800 Parts
Model Family · Source: Dexter parts manual 8533-216-001, 9/25
Controls & electronics (66)
| Part | Description |
|---|---|
| 9539-461-007 | Switch, Locking Sensing |
| 9539-461-008 | Switch, Latching Sensing |
| 9539-492-001 | Switch, Door Hinge Close (Plunger) |
| 8220-057-035 | Wire Assy, Brown 3” |
| 8220-057-036 | Wire Assy Red, 3” |
| 8220-062-052 | Wireasy-org,71/2" |
| 8220-062-053 | Wire Assembly, Wht/org |
| 8220-062-059 | Wireasy-red,71/2" |
| 8220-063-036 | Red Wire (Door Close Switch) |
| 8220-063-037 | Black Wire (Door Close Switch) |
| 8220-063-051 | Blue Wire Assembly - Door Switch |
| 8220-063-052 | Blue/wht Wire Assembly - Door Switch |
| 8220-108-012 | Wireasy-red/pnk,8" |
| 8220-108-013 | Wireasy-red/gry,8" |
| 8220-117-002 | Wire Assy, Jumper |
| 8220-117-003 | Wire Assy, Jumper |
| 8220-119-002 | Wire-assy, Jumper, Yellow |
| 8220-119-003 | Wire Assembly, Wht/red, Water Valve |
| 8220-158-029 | Wireasy,2.0,t-1450/t-80fss |
| 8220-158-038 | Wireasy,2.0, |
| 8220-159-005 | Wireasy-jumper,v2.0,relaypcb |
| 8220-159-006 | Wireasy-jumper,v2.0,relaypcb |
| 8636-018-001 | Fuse 1.5 Amp |
| 8636-018-005 | 2.0 Amp Fuse |
| 8654-117-015 | Clamp, Pressure Switch Hose |
| 8711-017-001 | Transformer |
| 9004-007-001 | Anchor-wiretie,adhesive |
| 9008-005-001 | Actuator, Latching Switch |
| 9008-006-003 | Actuator, Switch Locking |
| 9029-163-001 | Bracket Switch |
| 9029-309-001 | Bracket-switch,prox |
| 9035-063-001 | Button-control,2.0,opl |
| 9053-067-002 | Bushing , Wire 7/8 |
| 9150-058-001 | Ms 300 Vfd Display |
| 9200-001-002 | Fuseholder |
| 9242-175-003 | Hose, Pressure Switch |
| 9501-005-002 | Sensor Assembly |
| 9527-007-001 | Standoff-wire |
| 9538-182-001 | Spacer Sensor |
| 9539-498-001 | Switch-prox,18mm,shld,60" |
| 9539-499-001 | Switch-contactblock,dpst,nc |
| 9550-169-003 | Shield, Switch |
| 9586-001-003 | Thermoactuator - Door Lock Relay 24v |
| 9627-747-005 | Harness-power, Terminal Block |
| 9627-795-005 | Wiring Harness |
| 9627-921-001 | Wiringharness-cntrl/relay,v2.0 |
| 9627-922-002 | Wiring Harness, Ctrl/graphics |
| 9627-923-001 | Wiring Harness, Power Supply |
| 9627-926-001 | Wiringharness-ps,t-650-1450 |
| 9627-927-001 | Wiringharness-chemical,v2.0wshr |
| 9627-928-003 | Wiringharness-drsw/vfd,stp |
| 9627-928-004 | Wiringharness-drsw/vfd,stp |
| 9627-930-001 | Wiringharness-thermist,v2.0wsh |
| 9627-932-001 | Harness-power, Terminal Block |
| 9627-934-001 | Wiring Harness, 15-pin, Non-inj |
| 9627-935-001 | Harness-injection |
| 9627-936-004 | Wiringharness-doorlock |
| 9635-021-002 | Window-display,lcd(w/gasket) |
| 9732-315-001 | Kit-replacement, Pressure Sensor (Only) |
| 9799-027-001 | Pcbassy-maincontrol |
| 9799-028-001 | Pcbassy-relay |
| 9839-019-001 | Troughassy-control |
| 9857-230-003 | Contrlassy-display,2.0,opl,wsh |
| 9979-027-001 | Main Control Board |
| 9979-028-001 | Relay Board |
| 9989-601-001 | Panel Control Assembly(panel Only) |
Water valves & plumbing (35)
| Part | Description |
|---|---|
| 9118-049-001 | Diaphragm Invensys (Epdm) |
| 9379-183-012 | Valve, Water Inlet (Includes 1 Thru 6) |
| 9379-202-001 | Drain Valve 3” |
| 8641-242-000 | Washer, Inlet Hose (Furnished) |
| 8654-117-008 | Clamp, Hose Vent |
| 8654-117-009 | Clamp, Tub End |
| 8654-117-014 | Clamp |
| 8654-117-018 | Clamp, Hose Overflow to Drain |
| 8654-117-019 | Clamp for Motor Bushing |
| 8654-125-005 | Clamp, Cable |
| 9029-067-004 | Bracket, Drain Tube |
| 9064-072-001 | Body, Valve (W/ball) |
| 9118-049-002 | Diaphragm Invensys (Viton) |
| 9118-049-003 | Diaphragm Invensys (Epdm Nsf) |
| 9118-054-001 | Diaphragm Mueller |
| 9118-055-001 | Diaphragm Mueller |
| 9242-449-005 | Hose, Overflow to Drain |
| 9242-456-001 | Hose, Tub to Drain Valve |
| 9242-457-002 | Hose, Drain Valve to Tube |
| 9242-458-003 | Hose, Vacuum Breaker to Tub |
| 9242-463-006 | Hose, Overflow Vent Top |
| 9379-192-001 | Dual Coil Water Valve Mueller |
| 9379-192-002 | Valve Water Body Complete(no Coil) |
| 9379-194-001 | Single Coil Water Valve Mueller |
| 9379-194-002 | Valve Water Body Complete |
| 9452-814-001 | Mounting Plate Water Valves |
| 9550-195-001 | Shield Over Water Valves Plastic |
| 9555-056-001 | Screen, Inlet End of Valve |
| 9565-003-001 | Strainer, Inlet Hose (Furnished) |
| 9785-001-001 | Diaphragm Assembly Mueller Includes |
| 9915-129-002 | Tube Assy, Drain |
| 9942-449-005 | Hose, Overflow Tub to Drain Tube |
| 9950-061-001 | Ring Assy, Tub Mtg-front Clamp |
| 9990-027-011 | Hose, Water Supply 3/8” I.d. X 48” |
| 9990-027-013 | Hose, Water Supply 5/8” I.d. X 48” |
Drive & motor (30)
| Part | Description |
|---|---|
| 8640-437-001 | Nut 7/8”-9 (Bearing Housing to Frame |
| 8641-588-003 | Washers Spherical 7/8” (Male Half) (Bearing Housing to Frame) |
| 8641-588-004 | Washers Spherical 7/8” (Female Half) (Bearing Housing to Frame) |
| 9036-162-001 | Bearing, Rear (Large) |
| 9036-162-002 | Bearing, Front (Small) |
| 9040-079-006 | Drive Belt |
| 9053-074-002 | Bushing, Motor -support |
| 9053-077-001 | Split Taperbushing (Motor Pulley) |
| 9099-012-004 | Chain-belt Tension |
| 9189-016-001 | Vfd Cooling Fan |
| 9241-195-003 | Housing, Bearing |
| 9376-328-001 | Drive Motor, 3 Phase |
| 9452-538-001 | Plate, Motor Mtg |
| 9453-175-002 | Pulley, Motor |
| 9453-176-006 | Pulley, Driven |
| 9487-238-004 | Ring, Bearing Retainer |
| 9497-222-004 | Rod, Motor Mtg |
| 9534-369-001 | Spring, Belt Tension |
| 9537-195-002 | Shaft, Door Locking |
| 9538-149-001 | Plate (Spacers Needed for Replacement Motor Mtg. Plate) |
| 9538-185-001 | Spacer, Bearing |
| 9545-059-004 | Bolt, Tub End of Bearing Housing (7/16-14x1), Bolt From Inside Tub |
| 9545-066-001 | Screw-hex Cap, 7/8”-10 X 3” (Bearing |
| 9732-219-009 | Coin Bearing & Seal Kit |
| 9803-209-001 | Housing, Bearing- Assembly (Items #2-#6) |
| 9892-015-003 | Door Lock Gear Motor Assembly (60hz Only) |
| 9913-134-003 | Shaft Assy, Locking (Includes 4 Thru 7) |
| 9913-136-001 | Shaft Assembly (Includes #4-7) |
| 9914-137-015 | Motor & Gear Assembly 120v |
| 9914-137-023 | Motor & Gear Train (Complete) |
Door & lock (34)
| Part | Description |
|---|---|
| 8650-012-003 | Lock, Top (W/key) |
| 9206-431-001 | Door Gasket |
| 9244-091-001 | Handle, Door |
| 9885-024-001 | Door Lock Latching Assembly |
| 8640-413-002 | Nut, Hinge to Door |
| 8640-417-005 | Nut, Wiz Lock |
| 9001-063-001 | Arm - Door Lock |
| 9029-204-001 | Bracket Slide Lock |
| 9035-061-002 | Button-emergencystop,w/latch |
| 9051-055-001 | Bumper Loading Door |
| 9095-049-001 | Cam, Lock-top |
| 9095-051-001 | Cam, Locking |
| 9244-086-004 | Handle (Bumper Guard) |
| 9306-025-001 | Top Lock Key #6324 |
| 9452-625-001 | Plate-latch, Top |
| 9487-275-001 | Door Ring 180 Degree Large Hnge |
| 9497-225-016 | Rod, Door Lock |
| 9534-360-002 | Spring, Lock Cam |
| 9545-018-014 | Screw, Lock Mtg 1/4”-20 X 3/4” |
| 9545-056-002 | Thrd Form Screw, Door Mtg 5/16” X 5/8” |
| 9552-037-001 | Shim, Door Lock, Thin |
| 9552-043-001 | Shim Large Door |
| 9635-020-001 | Door Glass Window |
| 9732-139-001 | Kit - Door Gasket Expander Kit (Small) |
| 9732-139-002 | Kit - Door Gasket Expander Kit (Large) |
| 9732-346-002 | Pawl, Locking |
| 9845-006-001 | Top Door Hinge Leaf (No Pin) |
| 9845-007-001 | Bottom Door Hinge Leaf |
| 9885-031-001 | Latching Assy, Complete |
| 9955-031-001 | Door Hinge Assembly (Mounts to Tub Front) |
| 9960-286-005 | Door, Lower Service, Includes Handle |
| 9960-310-001 | Door Assembly Complete |
| 9982-346-001 | Plate Assy, Door Lock |
| 9985-190-001 | Bracket Assy, Slide Lock Actuator |
Coin & payment (3)
| Part | Description |
|---|---|
| 8545-051-003 | Special Tool for Removing Coin Acceptor |
| 9506-871-001 | Wiring Diagram and Schematic, Coin |
| 9545-053-002 | Coin Drop Screws |
Seals & gaskets (8)
| Part | Description |
|---|---|
| 8538-132-000 | Sealer-pipe |
| 8538-151-001 | Sealing Compound |
| 9206-421-003 | Gasket, Tub Front |
| 9532-134-001 | Seal, V Packer |
| 9532-140-008 | Seal, Large V140a |
| 9532-140-012 | Seal, Small V95a |
| 9732-327-001 | Kit - Seal Replacement |
| 9950-062-001 | Ring, Seal Mounting |
Hardware (83)
| Part | Description |
|---|---|
| 9545-008-014 | Screw, Flat Head- Front to Sides |
| 8639-994-001 | Screw |
| 8640-399-008 | Nut, Spring |
| 8640-401-001 | Nut, Twin 4-40 |
| 8640-411-003 | Nut Hexkeps #6-32 |
| 8640-412-005 | Nuts-hexkeps, #8-32 |
| 8640-413-004 | Nut, Elastic Stop 10-32 |
| 8640-414-003 | Nut, 1/4 Elastic Stop |
| 8640-414-006 | Nut, Hex 1/4-20 Unc |
| 8640-415-001 | Nut Wcad 3/8”-16 |
| 8640-426-001 | Nut, 9/32 - 28 Hex |
| 8640-442-001 | Nut, Spring-to Front Panel |
| 8641-414-006 | Nut, Hex 1/4-20 Unc (For Strap Assembly |
| 8641-569-003 | Washer, Spring |
| 8641-581-008 | Washer Flat 5/16 |
| 8641-581-018 | Washer, Flat 1/4 |
| 8641-581-026 | Washer -flat |
| 8641-581-030 | Washer, Flat |
| 8641-581-031 | Washer |
| 8641-581-034 | Washer, Flat |
| 8641-581-040 | Washer, Flat |
| 8641-581-044 | Washer-flat, .781x2-1/2x1/4 |
| 8641-582-003 | Washer, 3/8” |
| 8641-582-006 | Lockwasher #10 |
| 8641-582-007 | Lockwasher 1/4” Ext Tooth |
| 8641-582-020 | Lockwasher-exttooth, 3/4 |
| 8641-584-001 | Washer |
| 8641-585-001 | Washer, Finish |
| 8641-586-002 | Bevel Washer for 5/8” Bolt Used in Installations Using Angle Iron Bases |
| 8641-586-003 | Bevel Washer for 3/4” Bolt Used in Installations Using Angle Iron Bases |
| 8652-134-001 | Terminal Lug, Solderless |
| 9029-266-001 | Bracket, Vacuum Breaker |
| 9029-326-001 | Bracket, Terminal-mounting |
| 9046-085-001 | Bracket, Side Panel Under Front Panel |
| 9053-067-004 | Bushing, 1” |
| 9053-078-002 | Bushing Taperlock (Driven & Large |
| 9074-267-001 | Cover, Terminal Block |
| 9083-121-001 | Clip-push |
| 9451-181-004 | Pin, Groove (3/4) |
| 9451-181-005 | Pin, Groove (1 1/4) |
| 9451-193-001 | Pin, Guide |
| 9451-196-001 | Pin, Main Drive |
| 9491-009-003 | Rivet |
| 9534-298-001 | Spring, Armature Invensys |
| 9534-339-001 | Spring, Drive |
| 9534-350-001 | Spring - Extension |
| 9534-364-001 | Spring, Return |
| 9534-364-002 | Spring, Actuating |
| 9538-157-005 | Spacer-pcb,#8x1/8 |
| 9538-157-021 | Spacer, Plastic |
| 9545-008-023 | Screw Fillhdcr 10bx1/2” Guide |
| 9545-008-026 | Screw, #10b X 1/2 |
| 9545-008-027 | Screw Grn. #10-32x 1/2” |
| 9545-012-020 | Screw, Hx. 10-32 X 1” |
| 9545-014-009 | Screw, 5/16-18x3/4 |
| 9545-017-013 | Bolt, 1/2” -13 X 2” Rings to Base |
| 9545-018-024 | Screw Taper Bushing 1/4-20x1 |
| 9545-020-001 | Screw 4-40 X 5/8” |
| 9545-020-003 | Screw 4-40 X 1 1/8” |
| 9545-029-009 | Bolt, Top Front Ring 3/8”-16 X 3” |
| 9545-029-011 | Bolt, 3/8”-16 X 2” |
| 9545-030-002 | Screw, to Base-1/4” X 3/4” |
| 9545-031-005 | Screw-pnhdcr,6bx3/8 |
| 9545-031-010 | Screw-phillips, 6abx3/4 |
| 9545-031-011 | Cross Recessed Pan Hd Tapping Screw |
| 9545-044-003 | Screw -hxwshrhdslsems, 6-32 X 3/16 |
| 9545-044-006 | Screw, #6-32x5/16 |
| 9545-045-001 | Screw, Mtg #8bx1/4” |
| 9545-045-012 | Screw, Phillips, 8ab X 1/2” |
| 9545-046-007 | Screw - Hxwshdsl, 10-24 - 1.25f, Ctd |
| 9545-054-001 | Screw |
| 9545-054-002 | Screw |
| 9545-055-001 | Bolt, Eye (1/4”-20x1/2”) |
| 9545-057-004 | Bolt, 3/4-10-1 1/2 |
| 9545-060-005 | Screw-hxcap,5/8-11x3/4 |
| 9545-064-001 | Screw-phillips, 4mx0.7x8mm |
| 9558-025-001 | Strip-terminal Marker |
| 9558-036-001 | Strip-terminal Marking, Injector |
| 9806-024-001 | Cableassy-usb,snapin |
| 9897-026-005 | Terminalblockassembly-power |
| 9897-032-003 | Terminal Block-injector |
| 9897-033-002 | Terminal Block |
| 9985-189-001 | Bracket Assy, Slide - Unlock |
Panels & trim (30)
| Part | Description |
|---|---|
| 0935-135-002 | Vacuum Breaker Cap (Red) |
| 6292-006-007 | Key, Top- # 6324 |
| 8502-614-004 | Label High Voltage Warning |
| 8502-619-003 | Label Fusing & Installation |
| 8502-639-001 | Label-warning |
| 8502-716-001 | Label-fuse, 1.5amp |
| 8502-716-003 | Label-fuse,2a |
| 8502-756-001 | Washer Dispenser Label Black |
| 8502-756-002 | Label Dispenser (Blue) |
| 8502-757-001 | Label, Door Opening-black |
| 8502-757-002 | Label, Door Opening-blue |
| 8502-759-001 | Label, Warning Risk of Injury-black |
| 8502-759-002 | Label, Warning Risk of Injury-blue |
| 8502-761-001 | Label-warning, Notice |
| 8502-775-001 | Label-waterlevelsettings,opl |
| 8511-001-002 | Label Quality |
| 9046-086-001 | Brace, Side Panel Under Front Panel |
| 9412-278-001 | Nameplate Decal, Control |
| 9444-028-001 | Panel, Side (Left or Right) - Stainless |
| 9444-029-001 | Panel Top Front |
| 9444-030-001 | Panel Top Rear |
| 9452-725-001 | Stop Button Mounting Plate |
| 9454-873-001 | Panel Assy., Back, Upper |
| 9552-050-001 | Shim (Side Panel) |
| 9578-092-002 | Trim, Edge |
| 9578-092-005 | Trim Edge Protector |
| 9732-223-004 | Kit-emergency Stop, O-series (Includes #x, #y) |
| 9966-012-002 | Strap Assembly (Side Panel) |
| 9989-530-001 | Panel, Control (Mounts Nameplate) |
| 9989-872-001 | Panel Assy., Back, Lower |
Other (45)
| Part | Description |
|---|---|
| 8507-330-001 | Transient Voltage Surge Suppressor Infomational |
| 8514-296-001 | Booklet Owners |
| 8533-216-001 | Part # |
| 8545-051-002 | Torx#20 |
| 8545-056-001 | Special Tool for Adjusting Spacing Between |
| 8612-001-001 | Battery |
| 9015-008-001 | Armature Invensys |
| 9081-155-001 | Channel-trough,mtg |
| 9081-173-001 | Chanel-support, Trough |
| 9089-017-001 | Coil Assy., 120 V Invensys |
| 9089-051-001 | Coil Mueller |
| 9150-045-001 | Usb, Thumb Drive (Blank) |
| 9150-045-002 | Usb, Thumb Drive, W/file |
| 9150-054-001 | Dc Power Supply |
| 9183-046-001 | Filter Mueller |
| 9211-021-002 | Guide, Solenoid Invensys |
| 9341-046-001 | Link (Open End) |
| 9355-001-001 | Plastic Sleeve, Locator |
| 9375-039-006 | Vfd Delta Drive 208-240 Volt |
| 9452-858-001 | Plate Assembly, Drive Mounting |
| 9456-041-007 | Cylinder Plug (1.5” Plastic) |
| 9475-002-003 | Flow Restictors |
| 9483-004-003 | Breaking Resistor 160 Ohms |
| 9487-200-004 | Ring, Retaining |
| 9487-200-005 | Ring, Retaining |
| 9487-261-005 | Tub Back Mating Ring |
| 9487-276-001 | Mating Ring Guard Shield |
| 9497-029-001 | Channel Assembly, Rear |
| 9527-002-002 | Standoff Twistlock |
| 9544-040-001 | Strap-tie,adjustableratchet |
| 9545-041-006 | Plug, 7/8 |
| 9548-285-001 | Support-pcb, 3/8”, Edge Holding |
| 9550-184-001 | Plastic Shield Over Main Pcb |
| 9610-001-001 | Vacuum Breaker |
| 9627-933-001 | Wiringharnes-main,t-650-1450 |
| 9635-022-001 | Mode Light Backing Window |
| 9806-023-005 | Data Cable Assembly |
| 9806-025-003 | Cable-data, Communication |
| 9848-170-001 | Cylinder Assy |
| 9857-301-001 | Contrlsasy-trgh, Opl,60hz |
| 9869-046-001 | Tub & Cylinder Assy |
| 9930-187-001 | Outer Tub Assy |
| 9945-158-002 | Base Assy,frame |
| 9947-055-005 | Channel, Rear, |
| 9974-012-001 | Tub Front |
Part numbers and descriptions as printed in the manufacturer's parts manual. Reference only — no prices or stock.